1 x Pack of 400 Decking Screw Stainless Steel A2 5X60 cut Type 17 Drilling Point for 10 square meter

Fixing terrace flooring Exterior terrace boards for balcony, two boxes for 20 m2

FINISHING DECK BOARDS ON WOODEN RAFTERS FINISHING CLASS IV MARITIME PINE DECK BOARDS, 28MM THICK X 145MM WIDE, UNGROOVED, ON 45X70MM RAFTERS

Wooden terrace 120m2 of pine terrace on a class 4 pine frame

fixing wooden deck boards to rafters Autoclave class 4 PIN board Installation on 40x75mm rafters

fixing of 2.7 cm thick blades on 4.5 cm thick joists 1 x Pack of 400 A2 5X60 stainless steel terrace screws, anti-splitting point, cut type 17, for 10 square meters

fixing of 2.7 cm thick blades on 4.5 cm thick joists 1 x Pack of 400 A2 5X60 stainless steel terrace screws, anti-splitting point, cut type 17, for 10 square meters

Fixing wooden slats for the base of a mobile home Fixing wooden slats, 21mm thick

Screws for pine wood decking

For a 22m2 Douglas fir terrace at an altitude of 1100m in the heart of Velay

Wooden terrace Construction of a terrace in autoclave pine slats 150x27x3000 on exotic joists 12m2.

TERRACE 100m STAINLESS STEEL SCREWS 5X60

For terrace boards. For fixing Douglas 24x138x3000 terrace boards.

Assembly of a 90m2 terrace in pine Assembly of a 90m2 terrace in red northern pine, class 4, grid structure, pine joist placed on adjustable pedestals

To make cladding Fence cladding with joint cover cus 5x60 a2

The screws will be used to maintain a cladding This is a cladding for an Arcachon type fence covered with A2 5x60 stainless steel seal

For a cabin In a tree

chevron fixing on container from the inside to the outside Set of 400 A2 stainless steel terrace screws 5X60 Anti-splitting tip cut type 17 For 10M SQUARE

construction of a terrace construction of a 40M terrace in ml ze 27 slats

Terrace manufacturing Blooma pine autoclave blade class 3 Lg2.4m width 9.5 cm thickness 2cm

For the construction of a wooden terrace

Screws for wooden terrace

Installation of a wooden terrace 8 m in sinuous r

Laying terrace wood I use stainless steel a2 5x60 and a4 5x60 marine environment