Bolt With Nut Hexagonal Head M8X20 Class 8.8 Zinc Plated
- 1 unit
- 10 units
- 30 units
- 200 units
- 800 Units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 10 | 100 | 1000 | 4000 |
| Lot price VAT included | €0.50 | €1.00 | €1.30 | €12.20 | €44.00 |
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
| Diameter | M3 | M4 | M5 | M6 | M7 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M24 | M27 | M30 | M36 | M39 | M42 | M45 | M48 |
| Interior diameter | 3.1 | 4.1 | 5.1 | 6.1 | 7.1 | 8.1 | 10.2 | 12.2 | 14.2 | 16.2 | 18.2 | 20.2 | 24.5 | 27.5 | 30.5 | 36.5 | 39.5 | 42.5 | 45.5 | 49 |
| Exterior diameter | 6.2 | 7.6 | 9.2 | 11.8 | 12.8 | 14.8 | 18.1 | 21.1 | 24.1 | 27.4 | 29.4 | 33.6 | 40 | 43 | 48.2 | 58.2 | 61.2 | 68.2 | 71.2 | 75 |
| Tickness | 0.8 | 0.9 | 1.2 | 1.6 | 1.6 | 2 | 2.2 | 2.5 | 3 | 3.5 | 3.5 | 4 | 5 | 5 | 6 | 6 | 6 | 7 | 7 | 7 |
These items are intended for the manufacture of caster supports; they will be used to attach the casters to the supports.
These items are intended for the manufacture of caster supports; they will be used to attach the casters to the supports.
for classic vehicle for 5/16" UNF or UNC bolt
Restoration of a 1995 Mitsubishi L200
Wheel attachment Vespa 200px
Assembly of parts on a classic tractor Renault d22 from 1958
Save products on your wishlist to buy them later or share with your friends.
2026-08-30
I want to repair my BIGZZIA gaming chair by replacing a missing armrest fixing screw. BIGZZIA gaming chair, model X24F00K287. Armrest fixing screw: M8 35 mm, 1.25 mm pitch, domed head, hex socket BHC/Allen, 5 mm wrench, zinc-plated steel, with M8 Grower washer. Reference indicated in the instructions: screw c M8 35 mm + washer f.