Stud Anchor R-Xpt M6X85 Zinc Plated
- 1 unit
- 10 units
- 30 units
- 100 units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 5 | 20 | 50 | 200 |
| Lot price VAT included | €1.45 | €7.35 | €26.75 | €66.85 | €250.20 |
How do I measure the length of a screw?
The length of a countersunk screw is measured with the head. For all other heads, the length is measured under the head.
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
Wall bracket fixing in concrete wall Wall bracket fixing in concrete wall. 8x23 wall bracket, fixing every 50 cm
Fixing joists to a concrete wall 70x45 joist
self-construction of a garage using pallet wood
It's for fixing rafters I'm redoing a roof
Fixation de lisses basses sur dalle béton Pour construction ossature bois
Fixer des muraillére Goujon d'ancrage m12x180
Sandstone fixing for joist support 75 x 225 joists for roof terrace construction
Fixing a wooden beam to a concrete wall House renovation
will be used to fix a fence for a spa fixing a wooden base to a concrete slab
INSTALLING AN HOURGLASS FOR A ROOF FRAME
M12 anchor bolt used to fix timber frame walls to masonry. The timber frame is 45mm thick + the bottom plate (against the masonry at ground level) which is also 45mm thick. A minimum anchor bolt length of 180mm is required to comply with DTU standards.
Fixing a mural to a brick wall
Fixing a mural to a brick wall
Fixing a TV bracket: BONTEC Extra Long TV Wall Mount 1040 mm for 32-75 Inch Flat/Curved LCD/LED/OLED Screens up to 60 kg, Swivel, Tilt and Rotate TV Wall Mount, Max VESA 600x400 mm. 12 M 12 x 180 studs for fixing a swivel TV bracket to a concrete wall: BONTEC Extra Long TV Wall Mount 1040 mm for 32-75 Inch Flat/Curved LCD/LED/OLED Screens up to 60 kg, Swivel, Tilt and Rotate TV Wall Mount, Max VESA 600x400 mm. An 8 cm polystyrene insulation is placed in front of the wall. There should be 80 mm of anchorage of the studs in the concrete.
Anchoring a swivel TV mount in a 15 cm thick concrete wall with 7 cm polystyrene. Anchoring a swivel TV mount in a load-bearing concrete wall with 7 cm insulating polystyrene. There is therefore an overhang. With 12 1 x 180 dowels, there should be no problem with shear strength. The dowels should penetrate about 9 cm into the concrete. BONTEC Extra Long Reach TV Wall Mount 1040 mm for 32-75 Inch LCD/LED/OLED Flat/Curved Screens up to 60 kg, Swivel, Tilt and Rotate TV Wall Mount, Max VESA 600x400 mm.
Fixing of frame box
used to anchor the wall plate on a roof For an 80mm wall plate in reinforced concrete
Anchoring the implantation strips in a wooden frame I use an M12*180 dowel every 1M in order to anchor my lower strips in the masonry effectively.
Wooden wall bracket Wall bracket 75225 Frame shoe
anchoring edge joist on solid concrete to create a mezzanine of 85 m2 The anchored joists have a section of 80 x 240. the load recovery is 500 K per meter
Save products on your wishlist to buy them later or share with your friends.
2026-08-16
I use dowels to fix the bottom edges of a timber frame into the concrete slab. To anchor the bottom edge and the bottom rail of the timber walls.