1 x Framing screws TEKOR Countersunk Head With Serration T25 5X80 Thread Length: 47 cut Type 17 Drilling Point Zinc Plated

utilisation en montage ossature bois assemblage de montant / etresillons

travaux de menuiserie

Fixation structures bois Tekor torx t 25 5x80

Application: Structural timber assemblies / light framing: rafters, purlins, joists, frame studs, reinforcements, braces. Timber frame construction: fixing of framing components and bracing. Assembly of pergolas, carports, shelters, timber frames. Fixing of panels to timber structures (OSB/CTBX). TEKOR timber screw, countersunk head, TORX T25 5X80, 47mm thread, anti-splitting point type 17, zinc-plated steel. Diameter = 5, Length = 80, Surface Coating = White Zinc Plated, By-product Family = Countersunk Head, Material = Steel, Drive = Torx, Product Family = Wood Screws, Drive Dimensions = T25, Brand = Tekor. Dimensional guide (in mm): Diameter 5 6 8 10, Head Diameter 10 12 14 18. Other references: 3617500812544 WOOD SCREW.TF. LC35303 3663072195745

These screws will be used to fix the boards of my garden shed together TEKOR T25 5X80 timber screws

Secure the boards in the chicken coop

Assemble vjhcbbv Du un je cfkncfhhcbb

Screwing battens for cladding installation 27x40mm battens installed on edge

Garage framing TEKOR T te fresh e Crant TORX T25 5X80 framing screws

Fixing 45x30 battens for a wooden house extension.

Assembling two pieces of wood. Assembling two pieces of softwood, fir, 60mmx40mm draught strip and 90mmx40mm joists.

For maintaining a wood cladding on the back panel

Timber frame

Sheepfold renovation Construction of a handling pen

To fix battens to joists 27x37 battens

Roof batten screws Tekor screws of perfect quality for roof framing

screwing battens for a wooden cabin roof to screw my wooden battens onto wooden joists

Hangar construction 200 x TEKOR structural screws, T-shaped, with TORX T30 6X90 thread, 54mm diameter, anti-splitting point type 17, zinc-plated steel, reference 2040609002_200

16mm OSB fixing

I'm using these 80mm screws to fix joists to an OSB floor. These joists will eventually support a pine parquet floor.

WOOD CONSTRUCTION 50mm SECTION WOOD

To help me finish the animal shelters, the barriers, the hay rack and the watering trough

fixing tiles on wooden battens for canal tiles

Fixing the floors to the body of my Langstroth-style hives

screws for wooden frames 100*40 stud fixing GREB construction

3m wooden frame Screws for creating a 50m2 wooden frame

Barn cladding

Straw bale house construction GREB technique

rafter fixing to allow the under-slope to be fixed

Fixing my frame To hold 6x8cm rafters to allow fixing of 3-ply wooden boards

TEKOR Tekor Tte frais e TF Crant TORX T25 5X80 Filet e sur 48 Point anti-splintage cut type 17 Acier carpentry screws will be used to fix formwork boards under purlins (on which fiber cement is placed) in order to create a sort of highly reinforced sheathing from below. All this takes place in a shelter under which a camper van is parked. The idea is to protect against hail which could possibly break the fiber cement. TEKOR Tte frais e TF Crant TORX T25 5X80 Filet e sur 48 Point anti-splintage cut type 17 Acier carpentry screws will be used to fix formwork boards under purlins (on which fiber cement is placed) in order to create a sort of highly reinforced sheathing from below. The whole thing takes place in a shelter under which a camper van is parked. The idea is to protect against hail, which could potentially break the fiber cement.

This will allow me to fix my wooden frames Tekor screws are really very effective and do not split the wood

for screwing boards greb frame assembly

Screws intended for closing industrial boxes. TEKOR frame screws, countersunk head, TF, TORX slot, T25 5X80

metal frame fixing for partition and ceiling house under renovation with 2 apartments of 100m²

screwing wood screwing greb studs

assembly. for composter

Hello, this is for screwing wooden joists into wooden ceiling joists Wooden joists thickness 45mm

Assemble battens on frame Screw 60*40

Screws are used to fasten the different parts of the terrace together, whether to assemble the wooden slats, fix the joists (the supports below the decking), or to connect the terrace to the structure of the mobile home. They ensure the stability of the terrace and guarantee that it remains firmly in place, even in the face of weather conditions and daily movements.

To assemble a kitchen frame dt Frame with cedral cladding 24m2

Assembly of boards for the construction of a horse box. Assembly of 4m beams on 15x15 posts.

Fixing joists

WOODEN PARTITION 45x65mm upright

fixing partition lining wooden batten on wooden frame

fixing oak board in cladding

Wood to wood fixing T25 5x80 wood

Brace a pergola with 45x145mm timbers

We are currently carrying out a complete renovation of an old house, from the frame, placo to the wooden floor. Hence the numerous orders placed on your site since the end of 2023. Use of screws for wooden structures

Fixing joists (double joists)

Used to build a garden shed Shelters measuring 3mx3m, made of Douglas wood

Wood frame Wood frame

Wooden frame assembly.

Wood cladding Bracket fixing

assembly of a chalet of 20 m2 Touschalet 20 m2 Barbados 5