1 x Framing screws TEKOR Countersunk Head With Serration T25 5X70 Thread Length: 37 cut Type 17 Drilling Point Zinc Plated

Assembling a wooden floor TEKOR T-shaped timber screw, TORX T25 5X70 thread, 37mm diameter, anti-splitting point type 17, zinc-plated steel

Fixing the battens to the sheathing to maintain the notch under the roof

OSB plate fixing OSB3, 22mm OSB plate fixing OSB3, 22mm

Allows you to create assemblies Precision with 5mm diameter screws

for the design of the workshop frame Douglas fir timber fastening

Formwork for roofing Roofing formwork

OSB board fixing OSB board on rafter, 250 x 120

Partition wall frame 6*4 wood fixing

OSB 22mm plasterboard slab fixing Swiss Krono brand

aims for a floor 18 mm

Intermingling 6m x 5m Intermingling

versatile construction site, timber frame, frames, crossbeams, reinforcements, formwork, easily demountable, assemblies of standard sections (38/63, 45/70, etc.)

Timber screw 2040507002_200, Tekor, 570

Cladding fixing Cladding fixing

Your tools for fixing the brackets that hold the beams The brackets are available on the website

CONSTRUCTION WOOD SECTION 50

to install OSB

Construction of exterior wood cladding, requiring the assembly of rafters and half-rafters Use of TEKOR T te frais e TF Crant TORX T25 5X70 screws to fix the 40x63mm half-rafters to the primary rafter frame (63x75mm section)

nagement tage 200 x TEKOR Carpentry Screws Countersunk Head e TF TORX Slot T25 5X70 Thread e on 37 Anti-splitting tip type 17 Zinc-plated steel

nagement tage 200 x TEKOR Carpentry Screws Countersunk Head e TF TORX Slot T25 5X70 Thread e on 37 Anti-splitting tip type 17 Zinc-plated steel

development work

Fixing battens to rafters as part of insulating a slope

screwing in wall studs

Construction of a storage rack. Assembly of structural timbers to create a self-supporting support

Exterior Douglas fir cladding Sawmill plank

I need screws to redo my attic floor.

I need screws to redo my attic floor.

Wooden cladding and flooring Screwing cladding into the tongue

I am going to build a joist in an old house I am going to fix my spacers to the joists.

fixing screw OSB fixing

%00I drill wood like a ninja, I mill my head all by myself, and I hang on better than a jealous ex. With its TF milled head, it buries itself discreetly. Its 37 mm thread? Grips concrete in the frames. The type 17 point? It doesn't split, it drills like a hot blade in Comt. And with the TORX T25 head, no more slipping with the screwdriver. Zinc-plated, so it won't rust, even if it rains on your roof. In short: you screw, it holds, and it doesn't mess up."

Installation of wooden cladding Tekor t25 5X70

Used for the construction of a mezzanine for my daughter TEKOR frame screw T te frais e TF Crant TORX T25 5X70 Thread e on 37 Anti-splitting point cut type 17 Steel

Construction of a timber-framed house. The house will be 35m2, and will be entirely built by hand in the heart of the forest.

Djkbdkdkdndb Jeendkleekz z

Wooden cladding battens Counter battens for exterior cladding

Construction of a wooden frame garden shed Fixing the wooden uprights (spacers, vertical uprights)

Timber frame house Fixing battens for cladding

TEKOR 5x70 mm framing screws are ideal for assembling wooden structures, particularly in framework, timber framing and joinery. Their countersunk head ensures a perfect flush fit, avoiding annoying overhangs. The 37 mm partial thread allows for effective tightening of parts without the risk of separation. Their TORX T25 drive guarantees precise screwing without slippage. The cut type 17 anti-splitting tip reduces the risk of wood splitting, facilitating insertion without pre-drilling. Made from zinc-plated steel, they offer good resistance to corrosion indoors. They are perfect for fixing beams, joists and wooden panels with strength and durability. TEKOR 5x70 mm framing screws are ideal for assembling wooden structures, particularly in framework, timber frame and joinery. Their countersunk head ensures a perfect flush, avoiding annoying overhangs. The 37 mm partial thread allows for efficient tightening of the parts without the risk of separation. Their TORX T25 imprint guarantees precise screwing without slippage. The cut type 17 anti-splitting tip reduces the risk of splitting the wood, facilitating insertion without pre-drilling. Made of zinc-plated steel, they offer good resistance to corrosion indoors. They are perfect for fixing beams, joists and wooden panels with strength and durability.

Chalet cladding Log chalet, installation of insulation and cladding in local logs

frame reinforcement for attic conversion

Rigging attachment, BLS 38/89 in 4.2m

Fixing three herringbone furrows

wooden frame t te frais e TF notch

timber frame frame, convertible attic

attic frame made swimmable frame modification

Lathing for cladding Lathing and counter-lathing for canexel cladding

Shelves with fir cleats 40x70

I am a carpenter and I do a lot of personal projects at home, so I use these screws for various jobs, interior design, furniture creation, etc. Dimensions are essential and the sections of wood I work with are often the same: 4 6, 6 8, 2.7 4cm so you need the corresponding screws!

Slat attachment

Custom staircase structure assembly

lathing for wooden cladding support on hangar SCREB brand, dimensions 18 m * 11.2 m, height 5m.

fixing for Douglas clapboard cladding slats Fixing on 27x40 battens with 600mm center distance for installing Douglas clapboards for exterior cladding

Balinese bed Balinese bed by the pool

OSB floor attachment to joist

Fixing six boxes I use these screws to fix six 50mm boxes with a wash of 30 which makes a fixing in the 40mm wooden frame.

formwork board fixing attic floor fixing