Hinge Type E 6 Hole Stainless Steel A2 85X30
- 1 unit
- 2 units
- 3 units
- 5 units
- 20 units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 10 | 30 | 100 | 400 |
| Lot price VAT included | €0.70 | €1.60 | €4.80 | €16.30 | €56.60 |
How do I measure the length of a screw?
The length of a countersunk screw is measured with the head. For all other heads, the length is measured under the head.
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
| Diameter | 5 | 6 | 8 | 10 |
| Head diameter | 10 | 12 | 14 | 18 |
timber frame assembly of window and door lintels.
To reinforce a frame by screwing in a metal piece
Fixing sleepers 63x120 Douglas wood
Secure the timber framing Screw the rafters onto the purlins
Screwing timber frame walls
Fixing the rafters to the purlins 6 x 140 mm diameter screws
qdqdqsdsqdqsdqs azeazezaeazeazezaea
assemblage de cadres d'ossature bois vissage perpendiculaire d'ossature bois 45x145
Fixation jambes de forces clôtures Clôture agricole, vis pour piquets d’acacia et fixation de jambes de force
pour faire un plancher bois vis tekor torx 6x140
Fixation cadre pergolas en bois Pergolas sur mesure en Douglas
Création châssis bois Je dois créer une structure porteuse pour des panneaux OSB dans des combles qui vont être isolés en ouate de cellulose
utilisation en charpente Vis charpente TEKOR Tête fraisée Cranté TORX T30 6X140 Filetée sur 80 Pointe antifendage type 17 Acier zingué
Fixation de chevron dans panne de charpente Chevron de 60x75 fixé dans panne de 100x200
Fabrication de bac à plantes: fixation des planches de châtaigner sur montants en châtaigner fendu. Planches épaisseurs 50mm, montants fendus, épaisseur environ 120mm
Renforcement chevrons Vissage chevrons 80mm sur poutre de la charpente en complément des anciennes pointes existante
Pour chantier de charpente OSB 3 pour plancher bois
fixation de chevron pour cabane dans les arbres chevron 60mm/120mm en epicea
Fixations de chevrons type 6x8cm
FIXING RAFTERS IN PURGES TEKOR T-shaped timber screws, fresh and TORX T30 6X140
fixing joist to beam
To screw 2 beams together Beam measuring 225x75
220 x 45 timber frame assembly Double assembly, in gupe
Same as the 8x120 wood element fixing Same, nothing to complain about. Excellent value for money?
Timber assembly Rafter assembly 63x75 purlin 225 x 75
dt kitchen
Rafter fixing Public works site,
Fixing spacers Will allow me to fix spacers between joists
For assemblies in timber frame houses
It will be used to screw in the timber frame Screw in the timber frame using 145 x 45 treated fir
Screwing the structural element Screwing with 6x140 T-shaped screws for the structural purlin
Framing of our wood joinery Loleto - Manon
For restoring the roof of my barn For fixing the rafters
Fixing 280m of rafters
Screws for framing Framing screws for pergola
Screwing a floor Screwing joists onto beams
Joist fixing Fixing 63x175 joists to old beams
Timber frame fixing Deck structure
frame fixing TEKOR T fresh e Crant TORX T30 6X140
Timber frame fastening Timber frame assembly fastening
6x140 screws 6x140 structural fixing
These screws will be used to fix 6x8 rafters into purlins to create a floor 6x140 screws
As part of the construction of treetop adventure courses, large platforms, and treetop climbing games. As part of the construction of treetop adventure courses, large platforms, and treetop climbing games.
Timber frame house construction and roof structure Particularly for assembly on Douglas fir studs
Timber frame house construction and roof structure Uprights, joists, rafters... in Douglas fir.
Screwing wooden picture frame for window
Timber screws for counter-joists for wood decking Bamboo decking, PEFC certified joists
fixing in Douglas fir timber frame
Timber frame construction Erecting partitions
Wooden joist assembly for 60x80 timber frame
60x80 wooden joist assembly for timber frame construction
Use for fixing a set of different rafters measuring 50 x 70 mm
fix the t the Monopanel
Furniture assembly Douglas fir
Assembling wooden furniture With Douglas fir
WOOD FRAME SPACER
timber screw Tekor countersunk head screw TF TORX T30 6x140
Fixing 80x60 rafters to purlins Douglas fir 80x60 rafters and 10x220 purlins
OSB flooring construction OSB flooring construction
Fixing a 9x9 railing into an oak beam
Construction Tiny House Construction 6.60m
These screws will be used to screw joists for a sheet metal roof.
To make the frame I use T30 screws, diameter 6 by 140, to make the frame for a straightening in an old building
Strengthen my roof structure TEKOR Torx screws
frame screws wood frame fixing
Fixing wooden rafters to frames Use for fixing rafters
Framework TEKOR SCREWS 6X140
Framework TEKOR SCREWS 6X140
Fixing battens for cladding and insulation Extruded polystyrene insulation. Ecological composite cladding
house frame construction
house frame construction
Interior wood frame construction TEKOR framing screw Countersunk head TF TORX slot T30 6X140 Thread e on 70 Anti-splitting tip type 17 Zinc-plated steel
fixing screw OSB fixing
This is to make a mezzanine structure for a workshop Used to fix the purlins to the main beams
Frame screws for fixing joists 70x220 floor joist fixings
Structural assemblies of timber frame wall frames I discovered TEKOR screws during the construction of my timber frame house, the prices are extremely competitive and the quality is consistent, which is not always the case with other brands. The anti-splitting tip and the Torx head are really recommended, especially if you screw with an impact driver.
timber fixing timber 75x225
<br /> TEKOR framing screw, flat head, TF, TORX slot, T30, 6X140, thread e on 70, anti-splitting point, cut type 17, Steel Used for redoing a roof
Timber frame Douglas frame 80/60 rafters 200 m2 surface area
Fixing rafters to purlins 6x140 screws for fixing 6x8 rafters to purlins
I fix timbers
Frame framing 45x145 timber frame section
It is used to screw structural elements 100x100 beams
Product for fixing 40mmx100mm beams for lining
Creation and manufacture of a garage floor for a future attic 6.5m/3m by 1.70m high
Manufacture of wedges for the restoration of a construction machine Manufacture of wedges using your TEKOR 6x140 to assemble 8x10cm rafters.
Fixing rafters catpente Rafter 63x75 Jura fir
fixing rafters on beam 6x8 rafter on 20x12 beam
Fixing the rafters For my garage frame
traditional framework OSB panel fixing
Wood screws for wooden frames 140 x 45 mm frame
Construction of a wooden frame Allows me to fix 3 45mm beams together, i.e. 135mm in total
Rafter fixing 6x4 rafters - on 170 purlins
fixing insulation under the roof The screws will allow me to fix the polyurethane insulation under the roof, 80 mm thick polyurethane + 20 mm battens (air gap). In the end, the screw will be screwed onto the rafter with 40 mm of thread.
Renovation of a 70m barn (reconstruction of 2 wooden floors). Frame screws, wood and chipboard screws, Spar screws; only in zinc-plated steel, anti-splitting tip.
screwing of beams on the roof of a wooden shelter supported by posts beams 4m 75x225 posts 150x150
wooden frame wall I build walls 7m long and 3m high
Frame assembly Bero design
Frame assembly Custom manufacturing
Fixing rafters Express Screws 400 x Timber Screws Countersunk Head TF TORX T30 6X140 Thread e over 70 Anti-splitting point cut type 17 Zinc-plated steel
Fixing the joists together for reinforcement Joists sections: 75 x 200 mm
Assembling 2 joists together to double them. The joists have a section of 75/200 - I opt for 6 x 140 screws
Mounting OSB on metal roof purlins OSB Kronospan 22mm on Zed purlins
rafter fixing fir rafter fixing in 60x80mm
To fix rafters I fix 8x8 rafters to the trusses
Fixing joists 76 225
screws for framework fixings for purlins and wooden frame walls
screws used to fix joists to a beam of a mezzanine in a room with a high ceiling. The assembly is palm greasy with rest. span of the joists 1700mm. dimension 60x175. center distance 450mm. dimension beam 75x190 span between posts 3m. length of my mezzanine 4.5m
screws for installing a retractable staircase Carpentry Screws Flat Head TF Slot TORX T30 6X140 Thread e over 70 Anti-splitting point cut type 17 Zinc-plated steel
Fixing rafters to purlins Torx 6x140 mm
Screws for fixing enclosure frame Douglas wood fixing 5x6
Bastaing fixing dimension 65*175
Floor joist Douglas joist 75x200
I need this product to build a wooden cabin for my son Its size will be 6m x 6m for the floor and the walls will be pallet so I think I would recommend screws
Frame And terrace
Construction of a garden shed Frame screw T te countersunk e TF Crant TORX T30 6X140 Thread e on 70 Anti-splitting tip cut type 17 Steel
Wooden frame construction assembly, particularly between frame and uprights.
Construction of a wooden shelter Framing screw Countersunk head TF Crant TORX T30 6X140 Thread on 70 Anti-splitting tip cut type 17 Steel Packaging: 100 pieces
For the assembly of a frame for a shelter to assemble it
Fixing bastaings This is for fixing 33 cm spacers between the bastaings
For fixing rafters Will be used to fix 6x8 rafters on 22x10 runs
Framing, DIY Screw rafter
Wooden beam assembly for a shelter
wood flooring fix 75*225 section purlins
Assembly of modules for health trails. Acacia wood. Used to make a structure with 9cmx3cmx300cm boards
Wooden structure assembly of garden shed For rafters 50x75
I use it to fix the lathing of my house. I fix 30x50 slats which cross my rain cover, 60mm of gutex wood wool and which then attach to my frame.
Screwing wood Screwing joists
Rafter assembly Screwing rafters onto purlins of a carport
wall mounting wood frame 6x140 torx 30
Frame assembly For a sheepfold
Fix rafters on frame 80x80 rafter
Fixing rafters Fixing wooden frame rafters
Save products on your wishlist to buy them later or share with your friends.
2026-08-23
fixing rafters between purlins and bottom plate rafters 60*80 section in 5 m lengths, purlins 200*80 section in 6 m lengths