Elastic Pin Steel 6X30 Slim Series
- 1 unit
- 10 units
- 100 units
- 500 Units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 10 | 100 | 500 |
| Lot price VAT included | £3.69 | £7.33 | £8.81 | £31.41 |
How do I measure the length of a screw?
The length of a countersunk screw is measured with the head. For all other heads, the length is measured under the head.
How do you measure the length of a threaded rod?
The length is measured from one end to the other.
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
| Diameter | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 | 4.5 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 18 | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | 36 | 38 | 40 |
| T | 1.65 | 2.2 | 2.75 | 3.3 | 3.8 | 4.35 | 4.85 | 5.35 | 6.4 | 7.45 | 8.45 | 9.5 | 10.5 | 11.5 | 12.5 | 13.5 | 14.5 | 15.5 | 16.5 | 18.5 | 20.5 | 22.5 | 24.5 | 26.5 | 28.5 | 30.5 | 32.5 | 34.5 | 36.5 | 38.5 | 40.5 |
| e | 0.2 | 0.2 | 0.25 | 0.3 | 0.3 | 0.4 | 0.4 | 0.5 | 0.6 | 0.6 | 0.8 | 1 | 1 | 1 | 1 | 1.2 | 1.5 | 1.5 | 1.5 | 1.75 | 2 | 2.5 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 4 | 4 | 4 |
Save products on your wishlist to buy them later or share with your friends.