1 x Chipboard Screw Tekor Disc Head Screw T30 cut Type 17 Drilling Point 6X100 Partial Thread Zinc Plated

Fixation charpente

Fixing exotic wood that has been dry for 5 years and fixing fiber cement

Under-roof fixing Fibralight panels 200x60cm, 35mm thick

Screwing purlins in a timber frame

Screwing purlins in a timber frame

Tekor screws, very good quality For timber framing

fixing planks to make shelters for my horses

To fix struts to a pergola

to fix a 45x90 on 90x90 I use its TEKOR wood screws TORX disc head T30 Anti-splitting point type 17 6X100 Thread e on 50 Zinc-plated steel to fix 45 x 90 mm boards on 90 x 90 mm posts

Screw gates into wooden posts

Wood frame screws Allows assembly of 45mm wood frame uprights

Timber frame assembly Allows you to assemble 45 mm uprights

Screw into wood Tekor 6x100 Steel

Pergola consolidation

timber frame house

Garden chalet construction 6 x 100 for rafter screwing

Fastening Fur between posts Douglas wood - Aesthetic exterior use

fixing wood upright to sole TEKOR T wood screw and TORX T30 disc Anti-splitting tip cut type 17 6X100 Thread e on 50 Steel

I used the screws "TEKOR wood and chipboard screws TORX T30 disc head anti-splitting tip cut type 17 6X100 thread on 50 steel" to fix wooden rafters in concrete block for a fence wall. They are strong and durable, with a TORX head that prevents slipping and a tip that won't split wood. Perfect for secure fixing outdoors, I recommend these screws without hesitation after having used around 150 pieces on my project. I recently used the screws "TEKOR wood and chipboard screws TORX T30 disc head anti-splitting cut type 17 6X100 Threaded on 50 Steel" to fix wooden rafters with a section of 50x75 mm in concrete block, as part of the installation of a fence wall equipped with privacy panels between my property and that from my neighbor. These screws are exceptional in terms of strength and durability. The TORX T30 head offers excellent grip with the screwdriver, virtually eliminating the risk of slipping during screwdriving. The Type 17 anti-splitting tip makes it easier for the screw to enter the wood without splitting it, which is crucial for maintaining the integrity of the rafters. The installation was carried out with a percussion drill for the concrete and a screwdriver for the wood, and I am very satisfied with the quality of the fixing. The screws, 100 mm long with 50 mm thread, are perfectly adapted to ensure a secure and solid fixing. For this project, I used approximately 150 screws, and each screw met my expectations, ensuring a safe and secure installation. I highly recommend these screws for anyone needing a reliable solution for attaching wood to cinder block outdoors.

to repair a shed after a storm. Fixings for 50x50 wooden cleats