1 x Hook And Eye Turnbuckle M5X70 Eye 8 Stainless Steel A4

Project to train a trumpet vine on a facade. The project consists of creating a discreet and durable support to guide a trumpet vine along the wall to the right of the garage door. The support will take the form of five vertical stainless steel cables spaced evenly across a width of 75 cm and a usable height of approximately 2.36 m. The cables will be fixed at the top with adjustable stainless steel tensioners and at the bottom with fixed stainless steel brackets to ensure lasting tension. To keep the cables approximately 50 mm from the facade and limit their sagging under the weight of the vine, each cable will be guided at mid-height by a stainless steel eye bolt that serves only as a guide, without locking the cable. In a second stage, a horizontal stainless steel cable line will be installed on the other side of the garage, in order to extend the trellising and allow the trumpet vine to develop gradually on part of this side, respecting the architecture of the building. Materials used: 4 mm stainless steel cable, reference 9804004018_1 (5 vertical cables); A4 stainless steel turnbuckles with M5x70 hook eye, reference 9633050018_1 (5 units); Fixed wall fixings: 6x100 wooden eye bolt, 50 mm thread, 130 mm total length; 15 mm A2 stainless steel eye, reference 8673610018_5 (10 units); Intermediate guides: 6x100 wooden eye bolt, 50 mm thread, 130 mm total length; 15 mm A2 stainless steel eye, reference 8673610018_5 (5 units); A4 stainless steel thimble, 4 mm diameter, reference 9640000418_10; and A4 stainless steel double flat cable clamp. Part number 9641000418_1 for attaching the 4 mm stainless steel cable to the tensioner and eye bolt. 8 x 40 mm wall plugs for concrete support. The assembly will provide robust support, virtually invisible once the vegetation is established, while preserving the contemporary aesthetic of the facade and allowing for harmonious plant growth. Project for training a trumpet vine on a facade. The project consists of creating a discreet and durable support to guide a trumpet vine along the wall to the right of the garage door. The support will take the form of five vertical stainless steel cables spaced evenly over a width of 75 cm and a usable height of approximately 2.36 m. The cables will be fixed at the top by adjustable stainless steel tensioners and at the bottom by fixed stainless steel brackets to ensure lasting tension. To keep the cables approximately 50 mm from the facade and limit their sagging under the weight of the vegetation, each cable will be guided at mid-height by a stainless steel eye bolt, which serves only as a guide and does not secure the cable. Subsequently, a horizontal line of stainless steel cable will be installed on the other facade of the garage to extend the trellising and allow the trumpet vine to gradually develop on part of this facade, respecting the building's architecture. Materials used: 4 mm stainless steel cable, reference 9804004018_1 (5 vertical cables); A4 stainless steel turnbuckles with M5x70 hook eye, reference 9633050018_1 (5 units); Fixed wall fixings: 6x100 wooden eye bolt, 50 mm thread, 130 mm total length; 15 mm A2 stainless steel eye, reference 8673610018_5 (10 units); Intermediate guides: 6x100 wooden eye bolt, 50 mm thread, 130 mm total length; 15 mm A2 stainless steel eye, reference 8673610018_5 (5 units); A4 stainless steel thimble, 4 mm diameter, reference 9640000418_10; and A4 stainless steel double flat cable clamp. tre 4 R ref 9641000418_1 to fix the 4 mm stainless steel cable to the tensioner and the eyelet. 8 40 mm plugs for concrete support. The assembly will offer a robust support, almost invisible once the vegetation has developed, while preserving the contemporary aesthetics of the facade and allowing harmonious growth of the plant.

Tender stainless steel cable under a pergola roof to support climbing plants

Tendre des voilage dans mon jardin Voilage triangulaire, je vais associer les tendeurs a des pitons et du cable

Stretching a trellis wire Stretching a raspberry trellis wire

This product is used to install guardrail cables. The suspended terrace is homemade, no brand, I do all the manufacturing myself by purchasing all the hardware possible from vis express.

stretch stainless steel wires for a pergola

Stainless steel cable for guardrail 60m pool guardrail

Cable tensioner on wooden pergolas Eye hook tensioner M5X70 Eye 8 Stainless steel A4

A custom-made system for hanging shelves using metal cables

Ideal for washing line INOX ideal for outdoor use

use to create a green wall with diameter 5 stainless steel wire

Railing for a suspended staircase Hole of 2.5 m by 3 to a height of 5 m

I am going to create a rope guardrail Every 10cm, a rope will go from floor to ceiling all around the hopper