Washer Flat M14X27X2.5 Z Zinc Plated
- 1 unit
- 10 units
- 30 units
- 200 units
- 800 Units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 10 | 30 | 100 | 400 |
| Lot price VAT included | €0.50 | €1.00 | €1.20 | €3.45 | €13.20 |
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
| Diameter | M2 | M2.5 | M3 | M3.5 | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 | M42 | M45 | M48 | M52 | M56 | M60 | M64 |
| Tickness | 2.5 | 3.8 | 4 | 4.5 | 5 | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 18.5 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | 45 | 48 | 52 | 56 | 60 | 64 |
| Across flats | 4.5 | 5 | 5.5 | 6 | 7 | 8 | 10 | 13 | 17 | 19 | 22 | 24 | 27 | 30 | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 95 |
Wooden tag assembly Height 2m90
mount on threaded rod mount on threaded rod to hold metal angle brackets
Stubble cultivator rehabilitation Stubble cultivator
will be used to fix the body of my trailer to the tubular chassis Erde type 193 trailer body. 750 kg axle
autocross, sprintcar christec bazooka autocross, sprintcar christec bazooka
For caliper mounting
Fixation des pannes Fixation des pannes
Bumper assembly Porsche, front bumper
To secure the tightening
Weight training equipment modification
Mounting on a skimmer shackle. Mandatory to prevent loosening. On a Ghedini skimmer mounted on a 5T mini excavator. Nut fits onto M10x70 bolts
Use for my mobile sawmills To prevent the nuts from loosening due to vibrations
M canique M canique on Peugeot
ceiling must threaded rod e
With frame bolt body
mechanical assembly installation of trailer keel
manufacture of a dome greenhouse 8 m long greenhouse wooden structure aluminum fixing
For mounting my mobile saws To ensure permanent clamping despite vibrations, I use Nylstop
change on trailer boat trailer
Manufacture of hive support, the bolt serves as a pivot for the folding metal foot. The assembly supports 180kg for 4 bolts. The bolt goes through the wood (35mm) as well as the galvanized foot (35mm)
Save products on your wishlist to buy them later or share with your friends.
2026-10-11
TS 600 EVOLUTION AGRICULTURAL SEED DRILL TINE POINT FIXING