Washer Flat M10X20X2 Z Zinc Plated
- 1 unit
- 10 units
- 30 units
- 200 units
- 800 Units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 10 | 30 | 200 | 800 |
| Lot price VAT included | €0.50 | €1.00 | €1.80 | €11.60 | €40.40 |
How do I measure the length of a screw?
The length of a countersunk screw is measured with the head. For all other heads, the length is measured under the head.
Current mechanical classes of screws in accordance with ISO 898-1
Meaning of class 8.8:
The first number (8) indicates the ultimate tensile strength of the material, expressed in hundreds of MPa (megapascals).
Here, 8 × 100 = 800 MPa ultimate tensile strength.
The second number (8) indicates the ratio between yield strength and ultimate tensile strength, multiplied by 10.
Here, 8 means that the yield strength is 0.8 times the ultimate tensile strength.
So, yield strength = 0.8 × 800 MPa = 640 MPa.
Mechanical classes of screws (common examples)
Class Tensile strength (MPa) Yield strength (MPa) Typical use
4.6 400 0.6 × 400 = 240 Low-strength screw, light use
5.6 500 0.6 × 500 = 300 General light to medium duty
8.8 800 0.8 × 800 = 640 High strength, mechanical, construction
10.9 1000 0.9 × 1000 = 900 Very high strength, demanding applications
12.9 1200 0.9 × 1200 = 1080 Ultra high strength, heavy industrial use
Additional explanations:
Ultimate tensile strength: maximum load the screw can withstand before breaking.
Yield strength: maximum load before plastic deformation (permanent and irreversible).
The higher the class, the stronger the screw, but it is also often more brittle (can break suddenly without much bending).
Lower classes are used for assemblies that are less subject to high stresses.
Unmarked screw = class 4.6 or equivalent (generally)
In general, an unmarked screw is a low-strength screw, often made of mild steel or standard steel.
It may correspond to a class 4.6 (tensile strength ~400 MPa, yield strength ~240 MPa) or sometimes even lower.
These screws are suitable for assemblies not subject to high mechanical stress.
Why are they suitable?
Screws in higher classes (8.8, 10.9, 12.9, etc.) must be marked to guarantee their quality and traceability.
The absence of marking often means that the screw is not standardised or is of low quality.
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
| Diameter | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 24 |
| Head Tickness | 4 | 5.3 | 6.4 | 7.5 | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 |
| Across flats | 10 | 13 | 16 | 18 | 21 | 24 | 27 | 30 | 34 | 36 |
| Pitch | 100 | 125 | 150 | 175 | 200 | - | 300 |
boulonne la gaine de ventilation boulonne la gaine de ventilation
boulonne la gaine de ventilation boulonne la gaine de ventilation
BOULONNE LA GAINE DE VENTILATION BOULONNE LA GAINE DE VENTILATION
Fixation TV Vis fixation pour support mural TV
Customer resale Bodywork use
Boulogne ventilation ducts Boulogne ventilation ducts
Screwing on casters Attaching 105mm diameter casters
ventilation metal frame assembly
interview Puma case
maintenance Claas Dominator
guardrail junction visible screw
Guardrail fixings
Bedside Shelf Shelf of our bedside tables.
Box springs. Is used to secure packages in our box springs.
Assembly of our box springs We use these screws for our box springs
Storage bed here this screw is used for our storage bed bases
Assembly of our box springs Use for the assembly of our box springs
agricultural machine claas markant
This bolt serves as a counter-block on a hydraulic press
Save products on your wishlist to buy them later or share with your friends.
2026-05-17
Boulonne la gaines Boulonne gaines de ventilation