1 x Framing screws TEKOR Countersunk Head With Serration T30 6X140 Thread Length: 70 cut Type 17 Drilling Point Zinc

Timber frame house construction and roof structure Particularly for assembly on Douglas fir studs

Timber frame house construction and roof structure Uprights, joists, rafters... in Douglas fir.

Screwing wooden picture frame for window

Timber screws for counter-joists for wood decking Bamboo decking, PEFC certified joists

fixing in Douglas fir timber frame

Timber frame construction Erecting partitions

Wooden joist assembly for 60x80 timber frame

60x80 wooden joist assembly for timber frame construction

Use for fixing a set of different rafters measuring 50 x 70 mm

fix the t the Monopanel

Furniture assembly Douglas fir

Assembling wooden furniture With Douglas fir

WOOD FRAME SPACER

timber screw Tekor countersunk head screw TF TORX T30 6x140

Fixing 80x60 rafters to purlins Douglas fir 80x60 rafters and 10x220 purlins

OSB flooring construction OSB flooring construction

Fixing a 9x9 railing into an oak beam

Construction Tiny House Construction 6.60m

These screws will be used to screw joists for a sheet metal roof.

To make the frame I use T30 screws, diameter 6 by 140, to make the frame for a straightening in an old building

Strengthen my roof structure TEKOR Torx screws

frame screws wood frame fixing

Fixing wooden rafters to frames Use for fixing rafters

Framework TEKOR SCREWS 6X140

Framework TEKOR SCREWS 6X140

Fixing battens for cladding and insulation Extruded polystyrene insulation. Ecological composite cladding

house frame construction

house frame construction

Interior wood frame construction TEKOR framing screw Countersunk head TF TORX slot T30 6X140 Thread e on 70 Anti-splitting tip type 17 Zinc-plated steel

fixing screw OSB fixing

This is to make a mezzanine structure for a workshop Used to fix the purlins to the main beams

Frame screws for fixing joists 70x220 floor joist fixings

Structural assemblies of timber frame wall frames I discovered TEKOR screws during the construction of my timber frame house, the prices are extremely competitive and the quality is consistent, which is not always the case with other brands. The anti-splitting tip and the Torx head are really recommended, especially if you screw with an impact driver.

timber fixing timber 75x225

<br /> TEKOR framing screw, flat head, TF, TORX slot, T30, 6X140, thread e on 70, anti-splitting point, cut type 17, Steel Used for redoing a roof

Timber frame Douglas frame 80/60 rafters 200 m2 surface area

Fixing rafters to purlins 6x140 screws for fixing 6x8 rafters to purlins

I fix timbers

Frame framing 45x145 timber frame section

It is used to screw structural elements 100x100 beams

Product for fixing 40mmx100mm beams for lining

Creation and manufacture of a garage floor for a future attic 6.5m/3m by 1.70m high

Manufacture of wedges for the restoration of a construction machine Manufacture of wedges using your TEKOR 6x140 to assemble 8x10cm rafters.

Fixing rafters catpente Rafter 63x75 Jura fir

fixing rafters on beam 6x8 rafter on 20x12 beam

Fixing the rafters For my garage frame

traditional framework OSB panel fixing

Wood screws for wooden frames 140 x 45 mm frame

Construction of a wooden frame Allows me to fix 3 45mm beams together, i.e. 135mm in total

Rafter fixing 6x4 rafters - on 170 purlins

fixing insulation under the roof The screws will allow me to fix the polyurethane insulation under the roof, 80 mm thick polyurethane + 20 mm battens (air gap). In the end, the screw will be screwed onto the rafter with 40 mm of thread.

Renovation of a 70m barn (reconstruction of 2 wooden floors). Frame screws, wood and chipboard screws, Spar screws; only in zinc-plated steel, anti-splitting tip.

screwing of beams on the roof of a wooden shelter supported by posts beams 4m 75x225 posts 150x150

wooden frame wall I build walls 7m long and 3m high

Frame assembly Bero design

Frame assembly Custom manufacturing

Fixing rafters Express Screws 400 x Timber Screws Countersunk Head TF TORX T30 6X140 Thread e over 70 Anti-splitting point cut type 17 Zinc-plated steel

Fixing the joists together for reinforcement Joists sections: 75 x 200 mm

Assembling 2 joists together to double them. The joists have a section of 75/200 - I opt for 6 x 140 screws

Mounting OSB on metal roof purlins OSB Kronospan 22mm on Zed purlins

rafter fixing fir rafter fixing in 60x80mm

To fix rafters I fix 8x8 rafters to the trusses

Fixing joists 76 225

screws for framework fixings for purlins and wooden frame walls

screws used to fix joists to a beam of a mezzanine in a room with a high ceiling. The assembly is palm greasy with rest. span of the joists 1700mm. dimension 60x175. center distance 450mm. dimension beam 75x190 span between posts 3m. length of my mezzanine 4.5m

screws for installing a retractable staircase Carpentry Screws Flat Head TF Slot TORX T30 6X140 Thread e over 70 Anti-splitting point cut type 17 Zinc-plated steel

Fixing rafters to purlins Torx 6x140 mm

Screws for fixing enclosure frame Douglas wood fixing 5x6

Bastaing fixing dimension 65*175

Floor joist Douglas joist 75x200

I need this product to build a wooden cabin for my son Its size will be 6m x 6m for the floor and the walls will be pallet so I think I would recommend screws

Frame And terrace

Construction of a garden shed Frame screw T te countersunk e TF Crant TORX T30 6X140 Thread e on 70 Anti-splitting tip cut type 17 Steel

Wooden frame construction assembly, particularly between frame and uprights.

Construction of a wooden shelter Framing screw Countersunk head TF Crant TORX T30 6X140 Thread on 70 Anti-splitting tip cut type 17 Steel Packaging: 100 pieces

For the assembly of a frame for a shelter to assemble it

Fixing bastaings This is for fixing 33 cm spacers between the bastaings

For fixing rafters Will be used to fix 6x8 rafters on 22x10 runs

Framing, DIY Screw rafter

Wooden beam assembly for a shelter

wood flooring fix 75*225 section purlins

Assembly of modules for health trails. Acacia wood. Used to make a structure with 9cmx3cmx300cm boards

Wooden structure assembly of garden shed For rafters 50x75

I use it to fix the lathing of my house. I fix 30x50 slats which cross my rain cover, 60mm of gutex wood wool and which then attach to my frame.

Screwing wood Screwing joists

Rafter assembly Screwing rafters onto purlins of a carport

wall mounting wood frame 6x140 torx 30

Frame assembly For a sheepfold

Fix rafters on frame 80x80 rafter

Fixing rafters Fixing wooden frame rafters