1 x Decking Screw TEKOR Pan Countersunk Head T25 5X80 cut Type 17 Drilling Point Stainless Steel A4

fixation lames terrassse 15 m² DOUGLAS épaisseur 36 mm sur lambourdes 45 x 65 mm autoclavées avec cales caoutchouc

remise en état de la visserie d'une échelle de piscine Positionnement de vis sur l'échelle tous les 20 cm

CONFECTION D'UN PONTON

Fixing exotic wood decking boards 20mm thick Azob with pre-drilled holes

fixing wooden deck joists 13m deck

To create a joist structure for an exotic hardwood (Cumaru) terrace of approximately 140m², the joists will be connected together in a 6x4 configuration.

Building my terrace 6m * 1m with 40mm larch decking

I use these screws to make a pine openwork fence This is a Castorama pine product

I use these screws to make a pine openwork fence This is a Castorama pine product

Cladding batten fixing

To create a joist structure for an exotic wood terrace, while hiding an old carp pond and rainwater storage. The project consists of hiding an old 7 m pond while allowing the storage of several cubic meters of water. The whole will be connected to a garden pump equipped with a water distribution programmer. The terrace, approximately 18 m, will be made with exotic wood slats.

Building a terrace and installing Douglas fir decking boards with TFB TORX T 25 stainless steel A4 80X5 flat head countersunk head decking screws Building a terrace and installing Douglas fir decking boards with TFB TORX T 25 stainless steel A4 80X5 flat head countersunk head decking screws

terrace frame fabrication of douglas terrace 50m2

For wooden terrace For fixing the slats on concrete base

A4 stainless steel screw (aisi 316) for fixing terrace boards by the sea. A4 stainless steel required! A4 stainless steel screw with curved head borrows Torx dia 5 lg 80

reinforcement of garden shed for fixing a rafter in a corner which causes water