1 x Chipboard Screw Tekor Stainless Steel A2 Countersunk Head With Serration T25 5X80 Thread Length: 50 cut Type 17

fixation couvre joint fixation de couvre joint en remplacement de clou annelé

Assemblage structure Terrasse extérieure Assemblage de deux Solives en Badi 45x145

Fixation lame de terrasse épaisseur 35 terrasse Vis tekor 5x80 sur 50 Inox T20, très bien

Fixation lambourdes Lambourdes exotiques 42x65

Pose d'une terrasse lames bois Épaisseur des lames 27

salon extérieur fixation de poteau 7x7 cm pour la structure des salons extérieur

Construction of exterior fittings using class 4 treated wood

The product will be used to assemble a wooden wire mesh crate. These would be crates for raising poultry, measuring 1.60m long, 2.4m high, and 0.6m deep.

To build a pontoon Pontoon with exotic wood joists and Douglas fir planks purchased from Gallin Bois

Fixing against battens on a wooden frame

Fixing brackets and mounting hardware for gutter installation

Building a chicken coop Stainless steel screws for assembly

Fixing cladding planks 45mm thick plank

fixing a joist in a beam exotic wood joist, 40 x 60 section

Door Canopy 6x1.5 Homemade

Casto joist assembly Casto class 3 joist assembly in 63x38 for the roof of my chicken coop

Fixing an aluminum door frame to the wall

picnic table manufacturing picnic table manufacturing

picnic table manufacturing picnic table manufacturing

fixing wooden terrace boards, Douglas wood on treated pine joists, board thickness = 26 mm

picnic table manufacturing TEKOR A2 stainless steel wood and chipboard screws, countersunk head, TF, TORX T25 5X80 slot, thread e on 50, anti-splitting point, cut type 17

As part of a wooden frame, fixing of the lower rails, uprights and upper rails measuring 3000x220x45mm. Douglas wood Class 2 measuring 3000x220x45mm.

Construction of a barrier Fixing a 39x55mm lumber slat on a 40mm rafter

I take these screws for the manufacture of a wooden garden greenhouse TEKOR Inox A2 T te frais e TF Crant TORX T25 5X80 Thread e on 50 Anti-splitting point cut type 17

for a 40 m2 composite terrace

I am fixing OSB flooring OSB (250x125) with a thickness of 22mm

Terrace joist fixing Exotic wood 40x60

Joist fixings for exterior swimming pool terrace construction Very hard joists in exotic wood, composite terrace slats.

R novation play area Using screws on a wooden wickey play area that I am restoring

I planned to assemble the crosspieces of a carport on the vertical posts The 5m x 3m carport supplied by BRICI-DEPOT will serve as a support for the feet of KIWI

The screws will be used to attach crosspieces to posts to make a fence.