1 x Chipboard Screw Tekor Stainless Steel A2 Countersunk Head With Serration T20 4X40 Thread Length: 24 cut Type 17

wooden slat fixing 22mm wooden slat fixing for top and bottom privacy screen support, 3 slats per panel

Making wooden benches Dimensions 2.50 cm x 20 cm x 45 cm

Fixing boards for the construction of a 5m² garden shed

Flat flashing strip fixing for facade waterproofing Flat aluminum strip from EPDM Market, 3m long, 40mm high, perforated every 30cm. Fixing with additional washer/gasket

Construction of exterior fittings using class 4 treated wood

Installation of exterior cladding Cladding on a bungalow of approximately 50m² of living space.

This is for screwing oak furniture for a cellar. This is for assembling 20mm oak battens onto a 21mm oak stringer to make bottle shelves.

Garden shed renovation Roof board fixing

Fixing a wooden roof board for a wooden shelter.

Heavy-duty motorhome conversion Ayats Bravo 1 based on a MAN

Fixing insulator on stake for electric fence Tekor stainless steel screw 4x40 Torx drive.

Installation of vertical wood cladding

fixing boards on battens

Tiny house construction Cladding fixing screws

metal shoe attachment

Installation of openwork cladding on a garage Approximately 15m2 of 22x45 section ml ze slats

cladding fixing cladding fixing

Fixing floor tiles in a marine environment PARTEDIS Floor tiles 18 m/m rain edges s

Fixing batten and counter batten for cladding a garden shed.

I use these screws in a wooden garden greenhouse TEKOR Stainless Steel A2 Wood and Chipboard Screws Flat Head TF TORX T20 4X40 Thread e on 24 Anti-splitting point cut type 17

These screws are used to fix exterior cladding TEKOR A2 stainless steel wood and chipboard screws, countersunk head, TORX T20 4X40 slot, thread 24, anti-splitting point, cut type 17

I use these screws for wooden shutters and exteriors

Cladding a wall made with wooden siding Castorama Siding 2.39x14.5 18mm thick

18mm cladding fixing 18mm cladding fixing

construction of an outdoor cat hut 100*120 by 100d height

Cladding fixing

Fixing the first row of concrete tiles Wood and chipboard screws TEKOR Stainless steel A2 T te countersunk e TF Crant TORX T20 4X40 Thread e on 24 Anti-splitting tip cut type 17

creation of a lean-to manufacturing house 4.8m

Fixing wood blackouts on fence Wood blackout on BETAFENCE panels

I use these screws to fix the battens of a tiled roof in addition to the nails, particularly at the junction of 2 battens in order to prevent the ends of the battens from bursting with the nailer. I also use these screws to attach the zinc box valleys along the battens on each side of the valley.

cladding fixing 16mm cladding on interior decoration battens