1 x Chipboard Screw Tekor Stainless Steel A2 Countersunk Head With Serration T20 4X40 Thread Length: 24 cut Type

metal shoe attachment

Installation of openwork cladding on a garage Approximately 15m2 of 22x45 section ml ze slats

cladding fixing cladding fixing

Fixing floor tiles in a marine environment PARTEDIS Floor tiles 18 m/m rain edges s

Fixing batten and counter batten for cladding a garden shed.

I use these screws in a wooden garden greenhouse TEKOR Stainless Steel A2 Wood and Chipboard Screws Flat Head TF TORX T20 4X40 Thread e on 24 Anti-splitting point cut type 17

These screws are used to fix exterior cladding TEKOR A2 stainless steel wood and chipboard screws, countersunk head, TORX T20 4X40 slot, thread 24, anti-splitting point, cut type 17

I use these screws for wooden shutters and exteriors

Cladding a wall made with wooden siding Castorama Siding 2.39x14.5 18mm thick

18mm cladding fixing 18mm cladding fixing

construction of an outdoor cat hut 100*120 by 100d height

Cladding fixing

Fixing the first row of concrete tiles Wood and chipboard screws TEKOR Stainless steel A2 T te countersunk e TF Crant TORX T20 4X40 Thread e on 24 Anti-splitting tip cut type 17

creation of a lean-to manufacturing house 4.8m

Fixing wood blackouts on fence Wood blackout on BETAFENCE panels

I use these screws to fix the battens of a tiled roof in addition to the nails, particularly at the junction of 2 battens in order to prevent the ends of the battens from bursting with the nailer. I also use these screws to attach the zinc box valleys along the battens on each side of the valley.

cladding fixing 16mm cladding on interior decoration battens