Chipboard Screw Tekor Countersunk Head With Serration 5X70 Thread Length: 42 T25 Zinc...
- 1 unit
- 10 units
- 30 units
- 100 units
- 400 Units
screws
nuts
washers
Threaded Rod
Boxes / Tools
Chandlery
| Number of pieces | 1 | 10 | 30 | 200 | 800 |
| Lot price VAT included | £0.43 | £0.87 | £1.04 | £3.56 | £13.54 |
How do I measure the length of a screw?
The length of a countersunk screw is measured with the head. For all other heads, the length is measured under the head.
All our zinc-plated parts meet this specification (unless otherwise stated).
🛡️ Corrosion protection: low
Thin 3 to 5 µm zinc coating, suitable for environments with low exposure.
🧂 Salt spray resistance: 24 to 96 h
Indicative resistance before the appearance of rust, depending on the coating finish.
🏠 Recommended environment
Indoor applications or environments with very low exposure to moisture.
🔩 Threads preserved
The low coating thickness limits dimensional variations and helps maintain thread accuracy.
cladding installation Douglas fir cladding, 2.50m planks
stock replenishment it will have very different uses.
Timber frame Timber frame fixing
I'm going to use them to fix poplar paneling. They will be used to fix 20mm poplar boards onto oak joists.
Fixing OSB panels 18mm OSB3 panels on 200m Steico Joist
Zinc work Tekor 4x60
Perfect for fixing OSB panels. Screw 15mm OSB paneling onto a wooden frame in a garage. Pre-drill a hole in the panel for a better finish. Perfect for this type of work.
Subwoofer cabinet manufacturing Looking for 4x60 screws with a Torx bit
I use this screw for my garden tables society t at the garden furniture
Assemblage de deux pièces en bois
pour faire le bac a sable leroy merlin
Fixation latte peuplier de 27 mm sur compensations en douglas (isolationlaine de bois toiture par l'extérieur) Vissage du Plancher en peuplier de 27 mm au compensations de 120 mmX60 mm au dessus de l'isolant en laine de bois ISONAT FLEX 55 de 100 mm soit un premier vide d'air de 20 mm sous le lattis
Pour fixer des tasseaux sur une ossature bois. tasseaux de 27x45mm
I am a craftsman and I make planters.
Chevron Fasteners
Fixing battens to counter battens
Fixing board 160x20mm board
Vise assembly
Joinery and interior design Creation of closets and dressing rooms in MDF
formwork
angle bracket fixing
fixing battens 20*40 conversion
insulation cotton wool
Fixing the paneling in my wooden house Kontio Finnish kit
for bracket bracket fixing in rafter
Soon to be used for my timber frame wall project I have already used for the complete renovation of a traditional frame. TEKOR wood screw Countersunk head TF Slot 4X60 Thread 36 TORX T20 Zinc plated steel Anti-splitting tip type 17
Screwing a false ceiling in white melamine
garden shed frame garden shed frame
Furniture assembly Creation of wooden furniture using pallets
OSB face 4x50 screws on wooden joists for OSB flooring
Manufacture of barriers Creation of barriers from pallet wood approximately 15m
to screw boards on rafters
Outdoor woodwork Wooden fence held by screws
Fix OSB board For partition
Wood wool fixing Ceiling fixing
formwork b ton length 60 80 120 TORX T20
Fixing Osb panels In the frame uprights Osb 9mm, 12mm and 22 in the frame uprights in 45 *120
CARPENTRY Furniture manufacturing
Construction of terrace and kitchen. Construction of an exterior Douglas wood terrace as well as a summer kitchen also clad in Douglas.
Used to fix batten cladding in diameter 4mm they are thin enough not to split the 18mm batten
J4USES THIS SCREW TO MAKE MY GARDEN TABLES GARDEN ROOM COMPANY
bracing fixing in osb3 9mm thick on wooden frame
repair b tonni re b tonni re altran circlip diameter 60 min
Save products on your wishlist to buy them later or share with your friends.
2026-08-23
Fixing fir cladding to a timber frame Fixing 18x1858 mm wood chipboard, 4.50 m long