1 x Chipboard Screw Tekor Countersunk Head With Serration 4X50 Thread Length: 30 T20 Zinc Plated cut Type 17 Drilling

Wooden Floor Fixing Fixing 22mm OSB3 panels to joists

Je fabrique des meubles en bois Les vis sont parfaites pour fixer les planches de palettes

fixation toit fixation toit de table exterieure

Fixation de tasseaux sur OSB.

Pour mon plancher 4x50 tekor

Bricolages divers assemblage de grandes planches

Assemblage de morceaux de bois Fabrication d'étagères

laying wood flooring OSB flooring panel 60x120 22mm

for fixing panels for fixing sheathing

Underside of pergola

Creating a floor Screwing 22mm OSB onto joists

Construction of a ramp for people with reduced mobility Screwing OSB panels into a wooden structure

These screws allow me to make my joinery assemblies in 18mm Twin Oukoum plywood. These are often sound system speakers based on public plans made to order for my clients.

I use Tekor TF Crant 4x50 countersunk head wood screws with 30mm Torx T20 drive, zinc-plated steel, and anti-splitting tip (type 17) for formwork in various concrete structures using formwork boards (columns, lintels, slabs, etc.). They work very well, but can only be reused 3 times before the screw head wears out.

Screwing battens Laying 200x18 fir battens on 63x35 pine battens

screwing battens screwing for fixings

The screws will be used to create a wooden railing Screwing from below. Fir wood, 50x50mm section, split in half.

OSB mounting tekor 2036405002_800 4x50

To aim at the floor This helps us aim at floor slabs

wooden cabin wooden pergolas

OSB Flooring Fixing 18 and 23mm OSB slabs to joists

Fixing boards Covered terrace 28m2

Oak plank assembly TEKOR wood and chipboard screws Countersunk head TF Slot 4X50 Thread e on 30 TORX T20 Zinc plated steel Anti-splitting point cut

I use these screws for assembling furniture, they are, in my opinion, of good quality, no problem with them so far. I take this brand "Tekor" because they are much less expensive compared to other better known brands (Wurth, Spax..) and just as effective I find.

planter construction TEKOR wood and chipboard screws Countersunk head TF Slot 4X50 Thread 30 TORX T20 Zinc plated steel Anti-splitting tip cut

I use these countersunk screws to make formwork These countersunk head screws are widely used for making traditional formwork in construction. They can thus be easily assembled and disassembled for future use.

Use for fixing sheathing Sheathing, assembly plate, MOB brackets

Use for fixing gutter flanges and fascia boards on a roof.

25m terrace Construction of a terrace in Douglas fir slats laid on 40x60 joists and 30x40 pads.

floor fixing 200m surface

Fix the formwork Formwork boards, lengths 4 m,

I am going to use these screws to make the bottom of my planters The brand is Tekor, dimensions 4x50 and reference 2036405002_200

Screw floor osb3 Osb3 65x250 x18mm

These are screws I use to fix anchor shoes. SIMPSON brand shoe.