Your cart
There are no more items in your cart
-
Screws
-
Decking Screw
- DECKING SCREW PAN COUNTERSUNK HEAD TORX STAINLESS STEEL C1
- COUNTERSUNK BITS
- Bucket of Screw DECK Stainless Steel Stainless Steel C1 AISI 410 Countersunk Head Torx
- DECKING SCREW PAN COUNTERSUNK HEAD TORX STAINLESS STEEL A4
- Decking Screw Countersunk Head With Serration Torx Stainless Steel A2
- Decking Screw Pan Countersunk Head Torx Stainless Steel C2
- Decking Screw Double Thread Countersunk Head Torx Stainless Steel A2
- DRILL reamer
- Bucket of Decking Screw Stainless Steel A2 Countersunk Head Torx
- SKATE Of PROTECTION JOIST EPDM
-
Machine Screw Hexagonal Head
- Machine Screw Hexagonal Head Full Thread
- Machine Screw Hexagonal Head Full Thread Class 6.8
- Machine Screw Hexagonal Head Full Thread Class 8.8
- Machine Screw Hexagonal Head Full Thread 10.9
- Machine Screw Hexagonal Head Full Thread Stainless Steel A2
- MACHINE SCREW BRASS HEXAGONAL HEAD
- MACHINE SCREW HEXAGONAL HEAD ALUMINIUM DIN 933
- MACHINE SCREW HEXAGONAL HEAD CLASS 12.9 DIN 933
- Bolt Partial Thread Hexagonal Head
- Machine Screw Hexagonal Head Flange
- MACHINE SCREW HEXAGONAL HEAD FLANCHE WITHOUT SERRATION
- MACHINE SCREW HEXAGONAL HEAD FLANGE WITH SERRATION DIN 6921
- MACHINE SCREW HEXAGONAL HEAD FLANGE WITH SERRATION CLASS 8.8 DIN 6921
- MACHINE SCREW HEXAGONAL HEAD FLANCHE WITHOUT SERRATION CLASS 8.8 DIN 6921
- BOLT PARTIAL THREAD CARPENTER HEXAGONAL HEAD FLANGE
- MACHINE SCREW HEXAGONAL HEAD FLANCHE WITHOUT SERRATION STAINLESS STEEL A2 DIN 6921
- MACHINE SCREW HEXAGONAL HEAD FLANGE WITH SERRATION STAINLESS STEEL A2
- MACHINE SCREW HEXAGONAL HEAD FLANCHE WITHOUT SERRATION FULL THREAD STAINLESS STEEL A4
- Machine Screw Hexagonal Head Flange With Serration Stainless Steel A4 DIN6921+EMB CRANTEE
- Machine Screw Hexagonal Head Fine Thread
- Machine Screw Countersunk Square Neck Carriage
- Special Screws
- MACHINE SCREW HEXAGONAL HEAD + HEXAGON RECESS
- MACHINE SCREW HEXAGONAL HEAD SLOTTED DIN 933
- MACHINE SCREW HEXAGONAL HEAD POZI FLANGE CR.
- MACHINE SCREW HEXAGONAL HEAD POZI CLASS 8.8 FLANGE WITH SERRATION
- MACHINE SCREW HEXAGONAL HEAD FLANGE SLOTTED
- SCREW MACHINE HEXAGONAL HEAD SLOTTED STAINLESS STEEL A2 DIN 933
- Bolts Steel
- BOLT WITH NUT CARPENTER SQUARE HEAD
- BOLT WITH NUT HEXAGONAL HEAD CLASS 6.8 ISO 4014 + ISO 4032
- BOLT WITH NUT HEXAGONAL HEAD CLASS 8.8 ISO 4014 + ISO 4032
- BOLT WITH NUT HEXAGONAL HEAD CL6.8 500B DIN 933 + DIN 93
- BOLT WITH NUT HEXAGONAL HEAD ISO 4017 + ISO 4032
- BOLT WITH NUT HEXAGONAL HEAD CLASS 8.8 ISO 4017 + ISO 4032
- BOLT WITH NUT HEXAGONAL HEAD CLASS 6.8 HOT DIP GALVANIZED OVERSIZED
- Bolt HR
- Bolt Sb
- MACHINE SCREW HEXAGONAL HEAD STEP LEFT 10.9 ISO 4017
- HOLLOW SCREWS FOR RING TYPE BANJOS HEXAGONAL HEAD FINE THREAD DIN 7643
- Shoulder DIN 609
- Machine Screw Hexagonal Head With RD IMP Stainless Steel A2 DIN933+DIN6902A
- Machine Screw Hexagonal Head Full Thread
-
American Fasteners Unc-Unf-Bsw
- SCREW ROTOR EPAREUSE
- Machine Screw Socket Head Hexagon Recess Unc THREAD Hexagon Recess DIN916 UNC
- MACHINE SCREW SOCKET HEAD BSW
- PLOW BOLT COUNTERSUNK SQUARE NECK CARRIAGE CLASS 8.8 DIN 608 + DIN 934
- Bolt With Nut Hexagonal Head 8.8+RD.GRO Hot Dip Galvanized DIN933+DIN934+DIN127
- KEY UNC/UNF
- MACHINE SCREW HEXAGONAL HEAD UNC OR BSW BRITISH STANDARD WHITWORTH STAINLESS STEEL A2
- THREADED ROD UNC 3 PIEDS/90CM STAINLESS STEEL A2
- Nut Unc Unf BSW
- Screw Plastic Pan Head Pozi Thread 60 degree
- Machine Screw Socket Head American Thread
- Threaded Rod Pitch Unc Steel
- Machine Screw Cylindrical Button Head Unc Steel
-
Hexagonal Socket
- Machine Screw Socket Head
- MACHINE SCREW LARGE PAN HEAD STEEL
- MACHINE SCREW LARGE PAN HEAD HEXAGON RECESS STEEL
- MACHINE SCREW SOCKET HEAD FULL THREAD 10.9 ISO 4762
- MACHINE SCREW SOCKET HEAD BASSE/TROU HEXAGON RECESS CLASS 8.8
- MACHINE SCREW SOCKET HEAD FULL THREAD 10.9 FINE THREAD HEXAGON RECESS DIN 912
- MACHINE SCREW SOCKET HEAD FULL THREAD CLASS 8.8 HEXAGON RECESS DIN 912
- MACHINE SCREW SOCKET HEAD CLASS 8.8 HEXAGON RECESS DIN 912
- MACHINE SCREW SOCKET HEAD FULL THREAD CLASS 12.9 HEXAGON RECESS DIN 912
- MACHINE SCREW SOCKET HEAD BASSE/TROU HEXAGON SOCKET 8 STAINLESS STEEL A2
- SCREW MACHINE SOCKET HEAD WITH SERRATION STAINLESS STEEL A2 FULL THREAD
- MACHINE SCREW STAINLESS STEEL A2 SOCKET HEAD HEXAGON SOCKET 8 FULL THREAD DIN 912
- MACHINE SCREW SOCKET HEAD HEXAGON RECESS FULL THREAD STAINLESS STEEL A4 DIN 912
- CAP HEXAGON RECESS WITH COLLAR HEXAGON RECESS STAINLESS STEEL A2 GAZ
- CAP HEXAGON RECESS WITH COLLAR HEXAGON RECESS STAINLESS STEEL A2 FINE THREAD
- Machine Screw Socket Head Head Low DIN 7984
- Machine Screw Hex Socket Pan Head Cap
- Machine Screw Hex Socket Pan Head Cap Flange Hexagon Recess Class 10.9 ISO7380-2
- MACHINE SCREW HEAD HEX SOCKET PAN HEAD CAP HEXAGON RECESS ISO 7380
- MACHINE SCREW HEX SOCKET PAN HEAD CAP FULL THREAD 10.9 HEXAGON RECESS
- MACHINE SCREW HEX SOCKET PAN HEAD CAP CLASS 8.8 HEXAGON RECESS ISO 7380
- MACHINE SCREW HEX SOCKET PAN HEAD CAP 10.9 HEXAGON RECESS
- MACHINE SCREW HEX SOCKET PAN HEAD CAP HEXAGON RECESS BRASS
- MACHINE SCREW HEX SOCKET PAN HEAD CAP FLANGE HEXAGON RECESS STAINLESS STEEL A2
- MACHINE SCREW STAINLESS STEEL A2 HEX SOCKET PAN HEAD CAP FULL THREAD HEXAGON RECESS ISO 7380
- MACHINE SCREW HEX SOCKET PAN HEAD CAP FLANGE HEXAGON RECESS STAINLESS STEEL A4
- MACHINE SCREW HEX SOCKET PAN HEAD CAP FULL THREAD HEXAGON RECESS STAINLESS STEEL A4 ISO 7380
- Socket Head Hexagon Recess Screw Of PRESSION
- Screw Of PRESSION Socket Head Hexagon Recess Flat Point
- Screw Of PRESSION Socket Head Hexagon Recess Cone Point
- MACHINE SCREW BRASS SOCKET HEAD HEXAGON RECESS HEXAGON RECESS CONE POINT
- MACHINE SCREW SOCKET HEAD HEXAGON RECESS HEXAGON RECESS CONE POINT DIN914
- MACHINE SCREW STAINLESS STEEL A2 SOCKET HEAD HEXAGON RECESS HEXAGON RECESS CONE POINT DIN 914
- MACHINE SCREW SOCKET HEAD HEXAGON RECESS HEXAGON RECESS STAINLESS STEEL A4 CONE POINT DIN 914
- Screw Of PRESSION Socket Head Hexagon Recess Cup Point
- Screw Of PRESSION Socket Head Hexagon Recess Dog Point
- Machine Screw Large Round Head Hexagon Recess
- Machine Screw Mushroom Hexagon Recess
- Metrische Schrauben FLACHKOPF INNENSECHSKABNT de
- Machine Screw Flat Head Hexagon Recess
- MACHINE SCREW BRASS HEXAGON RECESS FLAT HEAD HEXAGON RECESS DIN 7991
- Machine Screw Stainless Steel A2 Flat Head Hexagon Recess Hexagon Recess Full Thread DIN 7991 ISO10642 SIMILAIRE
- MACHINE SCREW FLAT HEAD HEXAGON RECESS CLASS 12.9 HEXAGON RECESS DIN 7991
- MACHINE SCREW FLAT HEAD HEXAGON RECESS HEXAGON RECESS DIN 7991
- MACHINE SCREW FLAT HEAD HEXAGON RECESS FULL THREAD 10.9 HEXAGON RECESS DIN 7991
- VITI METALL SENKSCHRAUBEN MIT INNENSECHSKANT STAHL 10.9 DIN 7991
- MACHINE SCREW FLAT HEAD HEXAGON RECESS HEXAGON RECESS CLASS 8.8 DIN 7991
- Machine Screw Flat Head Hexagon Recess Hexagon Recess Class 10.9 iso10642,VS4721
- MACHINE SCREW FLAT HEAD HEXAGON RECESS STAINLESS STEEL A2 HEXAGON RECESS FULL THREAD
- MACHINE SCREW FLAT HEAD HEXAGON RECESS HEXAGON RECESS FULL THREAD STAINLESS STEEL A4 DIN 7991
- Flat Head Hexagon Recess Partial Thread Stainless Steel A2 ISO10642 SIMILAIRE DIN7991 FP
- Shoulder HEXAGON RECESS CLASS 12.9 ISO 7379
- Machine Screw Socket Head
-
Machine Screw
- Machine Screw Pan Head
- Cylindrical Head Slotted
- MACHINE SCREW BRASS PAN HEAD SLOTTED DIN 84
- MACHINE SCREW PAN HEAD SLOTTED STEEL DIN 84
- MACHINE SCREW LARGE PAN HEAD SLOTTED STEEL DIN 85
- MACHINE SCREW LARGE PAN HEAD SLOTTED STAINLESS STEEL A1 FULL THREAD
- MACHINE SCREW STAINLESS STEEL A2 PAN HEAD SLOTTED DIN84 ISO 1207
- MACHINE SCREW STAINLESS STEEL A2 LARGE PAN HEAD SLOTTED DIN 85 ISO 1580
- MACHINE SCREW PAN HEAD SLOTTED STAINLESS STEEL A4 DIN 84 ISO 1207
- MACHINE SCREW LARGE PAN HEAD SLOTTED STAINLESS STEEL A4 DIN 85 ISO 1580
- Machine Screw Pan Head Slotted With RD IMP Zinc Plated
- Pan Head Pozi
- Cylindrical Head Pozi Slotted
- Pan Head Torx
- MACHINE SCREW LARGE PAN HEAD TORX STEEL DIN 7985
- MACHINE SCREW PAN HEAD TORX 10.9
- MACHINE SCREW LARGE PAN HEAD STAINLESS STEEL A2 TORX DIN 7985
- MACHINE SCREW PAN HEAD TORX STAINLESS STEEL A2 FULL THREAD
- MACHINE SCREW STAINLESS STEEL A2 LARGE PAN HEAD TORX
- SCREW MACHINE PAN HEAD FLANGE TORX FULL THREAD STAINLESS STEEL A2 ISO 7380-2
- MACHINE SCREW LARGE PAN HEAD TORX STAINLESS STEEL A4 DIN 7985
- MACHINE SCREW BRASS LARGE PAN HEAD SLOTTED DIN 85
- Machine Screw Socket Head Thin Head Torx Stainless Steel A2 ISO 14580
- MACHINE SCREW HEAD SQUARE PHILLIPS STEEL DIN 7985
- MACHINE SCREW PAN HEAD SLOTTED FLANGE WITH SERRATION CLASS 8.8
- MACHINE SCREW PAN HEAD TORX CLASS 8.8
- MACHINE SCREW PAN HEAD REDUCED SLOTTED STAINLESS STEEL STAINLESS STEEL A2
- Zylinderschrauben Innensechskant GROSS KOPF TORX A2- EDELSTAHL de Vollgewinde
- Machine Screw Pan Head Torx Flange Class 10.9
- Cylindrical Head Slotted
- Machine Screw Countersunk Head
- MACHINE SCREW BRASS COUNTERSUNK HEAD SLOTTED DIN 963
- MACHINE SCREW BRASS COUNTERSUNK HEAD POZI DIN 965
- MACHINE SCREW COUNTERSUNK HEAD WITH HOLE SELF TAPPING
- MACHINE SCREW COUNTERSUNK HEAD SLOTTED STEEL DIN 963
- MACHINE SCREW COUNTERSUNK HEAD POZI STEEL DIN 965
- MACHINE SCREW COUNTERSUNK HEAD TORX STEEL
- MACHINE SCREW COUNTERSUNK HEAD PHILIPPS CLASS 8.8
- MACHINE SCREW COUNTERSUNK HEAD SERRATED
- MACHINE SCREW COUNTERSUNK HEAD PHILLIPS STEEL DIN 965
- MACHINE SCREW COUNTERSUNK HEAD PHILLIPS STAINLESS STEEL A2 DIN965
- MACHINE SCREW STAINLESS STEEL A2 COUNTERSUNK HEAD SLOTTED ISO 2009
- MACHINE SCREW STAINLESS STEEL A2 COUNTERSUNK HEAD POZI DIN965 ISO 7045
- MACHINE SCREW COUNTERSUNK HEAD TORX STAINLESS STEEL A2 DIN 965 ISO 7046
- MACHINE SCREW COUNTERSUNK HEAD SLOTTED STAINLESS STEEL A4 DIN 963 ISO 2009
- MACHINE SCREW COUNTERSUNK HEAD POZI STAINLESS STEEL A4
- Machine Screw Pan Countersunk Head Pan Countersunk Head
- MACHINE SCREW STAINLESS STEEL PAN COUNTERSUNK HEAD HEAD REDUCED
- MACHINE SCREW BRASS PAN COUNTERSUNK HEAD SLOTTED DIN 964
- MACHINE SCREW PAN COUNTERSUNK HEAD SLOTTED STEEL DIN 964
- MACHINE SCREW PAN COUNTERSUNK HEAD POZI STEEL DIN 966
- MACHINE SCREW PAN COUNTERSUNK HEAD POZI CLASS 8.8 STEEL DIN 966
- MACHINE SCREW STAINLESS STEEL A2 PAN COUNTERSUNK HEAD SLOTTED DIN964 ISO 2010
- MACHINE SCREW STAINLESS STEEL A2 PAN COUNTERSUNK HEAD POZI DIN966 ISO 2010
- MACHINE SCREW PAN COUNTERSUNK HEAD SLOTTED STAINLESS STEEL A4 DIN 964 ISO 2010
- Machine Screw Pan Head Torx Class 10.9 ISO 7380-1 + 6LOBES
- Machine Screw Mushroom Head
- SCREW MUSHROOM SLOTTED IN CROSS STEEL
- SCREW MUSHROOM POZI SLOT STEEL
- SCREW MUSHROOM POZI STEEL
- MACHINE SCREW MUSHROOM POZZI/FENDUE STEEL
- SCREW MUSHROOM POZI SLOT SECABLE STEEL
- MACHINE SCREW HEAD PAN HEAD LARGE POZI SLOTTED
- SCREW MUSHROOM SLOTTED STAINLESS STEEL A2 NFE 25129
- SCREW MUSHROOM POZI STAINLESS STEEL A2 NFE 25122
- SCREW MUSHROOM STAINLESS STEEL A4
- Screw Mushroom Slotted In Cross Stainless Steel A2 NFE 25-129
- Screw With Wings
- Shoulderless Thumb Screw
- Others Machine Screws
- Machine Screw flat
- Pan Head Cylindrical Head Knurlled
- Machine Screw Set Screw Slotted
- MACHINE SCREW BRASS SET SCREW SLOTTED FLAT POINT
- MACHINE SCREW BRASS SET SCREW SLOTTED CONE POINT
- SCREW MACHINE SET SCREW SLOTTED FLAT POINT
- SCREW MACHINE SET SCREW SLOTTED CONE POINT
- MACHINE SCREW SET SCREW PHILLIPS
- MACHINE SCREW SET SCREW SLOTTED DOG POINT FLAT PARTIAL THREAD STAINLESS STEEL A4
- SLOTTED SET SCREWS WITH CONE POINT STAINLESS STEEL A2
- MACHINE SCREW SET SCREW SLOTTED DOG POINT FLAT STAINLESS STEEL A2
- MACHINE SCREW SET SCREW SLOTTED CUP POINT STAINLESS STEEL A2
- Machine Screw Set Screw Torx Steel DIN34827 ISO4026 VS4646
- Machine Screw Set Screw Torx Cup Point Steel DIN34827 ISO4029 VS4647
- Eye Bolt Stainless Steel
- Machine Screw Pan Head Cylindrical Head Flange
- Welding Screw And Stud
- PATTES for MACHINE SCREW
- SCREW ROUE ACROSS FLAT CL8.8
- Machine Screw Pan Head
-
Screw And Nut Rectangular Linch Pin Rail
- MACHINE SCREW HEAD HAMMER STEEL
- MACHINE SCREW HEAD SQUARE STEEL
- MACHINE SCREW HEAD RECTANGULAR STEEL DIN 186B
- MACHINE SCREW HEAD LOZENGE STEEL
- MACHINE SCREW HEAD SQUARE YELLOW ZINC
- BOLT WITH NUT SQUARE HEAD CLASS 4.8 ISO 4032
- MACHINE SCREW HAMMER HEAD 10X10X4 STAINLESS STEEL A2 T28/15
- MACHINE SCREW HAMMER HEAD 10X22.73.X4 STAINLESS STEEL A2 T28/15
- MACHINE SCREW HAMMER HEAD 8.7X15.5X4 STAINLESS STEEL A2 T20/12
- MACHINE SCREW HAMMER HEAD 20X35.2X6 STAINLESS STEEL A2 T41/41
- MACHINE SCREW HAMMER HEAD 17.2X8X6 EDPM STAINLESS STEEL A2
- Hammer head bolts with spring ball 8X17.2 STAINLESS STEEL A2
- MACHINE SCREW HEAD LOZENGE STAINLESS STEEL A2
- MACHINE SCREW HEAD SQUARE STAINLESS STEEL A2
- NUT RAIL STAINLESS STEEL A2 BORD TRANCHANT
-
Wood Screw
- Wood Screw Round Head
- WOOD SCREW BRASS ROUND HEAD SLOTTED DIN 96
- WOOD SCREW PLAIN CHROMED ROUND HEAD SLOTTED DIN 96
- Chipboard Screw Round Head Pozi
- Chipboard Screw Round Head Torx
- Chipboard Screw Tekor Round Head Countersunk Head Torx cut Type 17 Drilling Point
- WOOD STEEL SCREW ROUND HEAD SLOTTED
- WOOD STEEL SCREW ROUND HEAD ROUND HEAD POZI
- Chipboard Screw Premium Round Head Pozi
- CHIPBOARD SCREW ROUND HEAD POZI GFD
- CHIPBOARD SCREW ROUND HEAD TORX GFD
- Screw HARDWARE ANGULAR Pan Head Torx cut Type 17 Drilling Point
- Chipboard Screw Round Head Pozi / Slotted
- Chipboard Screw Mushroom Torx
- WOOD SCREW STAINLESS STEEL A2 ROUND HEAD SLOTTED
- Chipboard Screw Stainless Steel A2 Round Head Pozi
- Wood Screw Hexagonal Head Hex Head Coach Screw
- Chipboard Screw Tekor Hexagonal Head Flange cut Type 17 Drilling Point
- Chipboard Screw Hexagonal Head Flange Across Flat
- Chipboard Screw Hexagonal Head Flange
- Framing screws TEKOR Hexagonal Head cut Type 17 Drilling Point Torx
- COACH SCREW DIN 571
- COACH SCREW
- COACH SCREW STAINLESS STEEL A2 DIN 571
- COACH SCREW STAINLESS STEEL A4 DIN 571
- Chipboard Screw Hexagonal Head Flange Without Point Key
- Wood Screw Mushroom Head
- Hex Socket With Hole Countersunk Head Connecting
- Euro Screw
- Hanger Bolt
- Others Wood Screws
- Wood Screw Pan Countersunk Head
- Wood Screw Pan Countersunk Head Pozi
- V.BOI Pan Countersunk Head Slotted
- WOOD SCREW BRASS PAN COUNTERSUNK HEAD SLOTTED DIN 95
- Chipboard Screw Pan Countersunk Head Slotted Brass
- WOOD SCREW PLAIN CHROMED PAN COUNTERSUNK HEAD SLOTTED DIN 95
- Chipboard Screw Pan Countersunk Head Slotted
- WOOD SCREWS PAN COUNTERSUNK HEAD SLOTTED STEEL DIN 95
- WOOD SCREW STAINLESS STEEL A2 PAN COUNTERSUNK HEAD SLOTTED
- Chipboard Screw Pan Countersunk Head Torx Stainless Steel A4
- Wood Screw Countersunk Head
- Wood Screw Countersunk Head Brass
- Wood Screw Countersunk Head Stainless Steel
- Wood Screw Countersunk Head Steel
- Wood Screw Countersunk Head Pozi
- Wood Screw Countersunk Head Slotted
- Wood Screw Countersunk Head Torx
- Wood Screw Countersunk Head Hole And Drill DIN 97 PET
- Chipboard Screw Tekor Countersunk Head Pozi Partial Thread cut Type 17 Drilling Point
- WOOD SCREW COUNTERSUNK HEAD SLOTTED HOLE AND DRILL
- Chipboard Screw Flat Head Hexagon Recess
- Wood Screw Disc Head Screw
- Wood Screw Truss Screw
- SCREW LACROIX
- PATTES for WOOD SCREWS
- WOOD SCREWS CARRIAGE BOLT +HC SOCKET CAP STEEL
- Sold In Roll Chipboard Screw Countersunk Head Pozi
- Wood Screw Round Head
-
Machine Screw Carriage Bolt
- BOLT WITH NUT CLASS 8.8
- CARRIAGE BOLT THIN SQUARE DIN 603
- CARRIAGE BOLT HEAD DIAMANT
- CARRIAGE BOLT PARTIAL THREAD
- CARRIAGE BOLT FULL THREAD
- BOLT WITH NUT CARRIAGE BOLT FULL THREAD
- BOLT WITH NUT CARRIAGE BOLT CLASS 6.8 HOT DIP GALVANIZED
- CARRIAGE BOLT STAINLESS STEEL A2 DIN 603
- MACHINE SCREW CARRIAGE BOLT STAINLESS STEEL A4 DIN 603
- Carriage Bolt Full Thread Stainless Steel A2 DIN603
- Carriage Bolt Stainless Steel A4 Full Thread DIN603
-
Drywall Screw
- DRYWALL SCREW for STEP GROS OR LARGE THREAD
- BANDE OF FIBRE ADHESIVE
- DRYWALL SCREW POINT DRILL
- DRYWALL SCREW
- BANDE DRYWALL SCREW
- Bucket of Drywall Screw Phosphated Plain vs2077
- DRYWALL SCREW MARK GFD
- Drywall Screw Spax FAT thread GIX B
- Drywall Screw Spax thread END GIX-A
- Drywall Screw Spax Self Drilling GIX-D
- Drywall Screw Spax FIBER-GYPSUM GIX-C
- Drywall Screw Spax GIX-G
- Spax Screw In BAND GIX-A
- Spax Screw In BAND GIX-B
- Spax Screw In BAND GIX-D
-
Thread Rolling Screw
- Thread Rolling Screw Pan Head
- THREAD ROLLING SCREW PAN HEAD SLOTTED STEEL DIN 7971 C
- THREAD ROLLING SCREW LARGE PAN HEAD POZI STEEL DIN 7981 C
- THREAD ROLLING SCREW LARGE PAN HEAD POZI/FENDUE
- SCREW THREAD ROLLING SCREW LARGE PAN HEAD POZI WITHOUT NAIL DIN 7981 SLOTTED
- THREAD ROLLING SCREW PAN HEAD SQUARE HEAD PHILLIPS STEEL
- THREAD ROLLING SCREW LARGE PAN HEAD PHILLIPS STEEL DIN 7981C
- THREAD ROLLING SCREW LARGE PAN HEAD POZI CRANS/TETE
- THREAD ROLLING SCREW PAN HEAD TORX STEEL DIN 7981 C
- THREAD ROLLING SCREW SOCKET HEAD STEEL
- THREAD ROLLING SCREW PAN HEAD TORX STEEL DIN 7970
- THREAD ROLLING SCREW LARGE PAN HEAD SQUARE
- THREAD ROLLING SCREW PAN HEAD PHILLIPS WITHOUT NAIL STEEL
- THREAD ROLLING SCREW STAINLESS STEEL A2 PAN HEAD SLOTTED DIN 7971
- THREAD ROLLING SCREW STAINLESS STEEL A2 LARGE PAN HEAD POZI DIN 7981C ISO 7049
- THREAD ROLLING SCREW STAINLESS STEEL A2 PAN HEAD SQUARE / PHILLIPS SQ2+PH2 DIN 7981
- Thread Rolling Screw Countersunk Head
- THREAD ROLLING SCREW COUNTERSUNK HEAD SLOTTED DIN 7972
- THREAD ROLLING SCREW COUNTERSUNK HEAD POZI WITHOUT NAIL DIN 7982 SLOTTED
- Thread Rolling Screw Countersunk Head Torx DIN 7982 C DIN 7982C,V3409
- THREAD ROLLING SCREW COUNTERSUNK HEAD PHILLIPS STEEL
- THREAD ROLLING SCREW COUNTERSUNK HEAD PHILLIPS WITHOUT NAIL STEEL
- THREAD ROLLING SCREW STAINLESS STEEL A2 COUNTERSUNK HEAD SLOTTED DIN 7972 ISO 1482
- THREAD ROLLING SCREW STAINLESS STEEL A2 COUNTERSUNK HEAD POZI DIN 7982 ISO 7050
- THREAD ROLLING SCREW COUNTERSUNK HEAD STAINLESS STEEL A2 TORX DIN 7982
- THREAD ROLLING SCREW COUNTERSUNK HEAD SQUARE STAINLESS STEEL A2 DIN7982
- THREAD ROLLING SCREW COUNTERSUNK HEAD PHILLIPS STAINLESS STEEL A2 DIN 7982
- THREAD ROLLING SCREW COUNTERSUNK HEAD POZI STAINLESS STEEL A4 DIN 7982
- Thread Rolling Screw Pan Countersunk Head
- THREAD ROLLING SCREW PAN COUNTERSUNK HEAD SLOTTED DIN 7973 C
- THREAD ROLLING SCREW PAN COUNTERSUNK HEAD POZI STEEL DIN 7983 C
- THREAD ROLLING SCREW PAN COUNTERSUNK HEAD PHILLIPS STEEL
- THREAD ROLLING SCREW STAINLESS STEEL A2 PAN COUNTERSUNK HEAD SLOTTED DIN 7973C ISO 148
- THREAD ROLLING SCREW STAINLESS STEEL A2 PAN COUNTERSUNK HEAD POZI DIN 7983C ISO 7051
- THREAD ROLLING SCREW PAN COUNTERSUNK HEAD POZI STAINLESS STEEL A4
- Thread Rolling Screw Hexagonal Head
- Thread Rolling Screw Mushroom
- Thread Rolling Screw Washer
- THREAD ROLLING SCREW HEXAGONAL HEAD POZI B.PIL STAINLESS STEEL A2
- Thread Rolling Screw Pan Head
-
Screw For Plastic
- Screw For Plastic Pan Head
- Chipboard Screw Round Head Torx MS
- SCREW FOR PLASTIC 30DEGRES CYLINDRICAL BUTTON HEAD POZI
- SCREW FOR PLASTIC THREAD 30[ PAN HEAD POZI WITHOUT POINT
- SCREW FOR PLASTIC LARGE PAN HEAD POZI SERRATED
- SCREW FOR PLASTIC HEAD CYLINDRICAL POZI
- SCREW FOR PLASTIC LARGE ROUND HEAD TORX
- SCREW FOR PLASTIC ROUND HEAD LARGE LARGE ROUND HEAD TORX
- SCREW FOR PLASTIC THREAD 30[ PAN HEAD TORX WITHOUT POINT
- SCREW FOR PLASTIC PLASFIX 45 PAN HEAD POZI WITHOUT POINT
- Screw Plastic Cylindrical Button Head Pozi cut Type 17 Drilling Point
- VIX PLASTIC PAN HEAD TORX SLOTTED 45 DEG
- Screw Plastic Large Pan Head Torx Stainless Steel A2
- Screw For Plastic Cylindrical Button Head Pozi Thread 30 degree Stainless Steel A2
- SCREW FOR PLASTIC COUNTERSUNK HEAD COUNTERSUNK HEAD
- SCREW FOR PLASTIC PAN COUNTERSUNK HEAD POZI WITHOUT POINT
- SCREW FOR PLASTIC PAN COUNTERSUNK HEAD PHILLIPS WITH NAIL
- SCREW OF FERRURE COUNTERSUNK HEAD PHILIPPS
- SCREW FOR PLASTIC THREAD 30[ COUNTERSUNK HEAD POZI WITHOUT POINT
- SCREW FOR PLASTIC COUNTERSUNK HEAD POZI 30 DEG
- VPC COUNTERSUNK HEAD PHILLIPS STEEL
- SCREW FOR PLASTIC 30 DEGRES COUNTERSUNK HEAD PHILLIPS STEEL
- SCREW FOR PLASTIC PLASFIX 45 COUNTERSUNK HEAD POZI WITHOUT POINT
- SCREW FOR PLASTIC 50DEGRES COUNTERSUNK HEAD POZI WITHOUT NAIL
- SCREW MACHINE SELF DRILLING LINCH PIN PLASTIC COUNTERSUNK HEAD ZING
- Screw Plastic Stainless Steel A2 Pan Countersunk Head Phillips
- Screw Plastic Stainless Steel A2 Pan Head Phillips
- SCREW PLASTIC COUNTERSUNK HEAD PHILLIPS THREAD 40 DEGRE STAINLESS STEEL A2
- Screw For Plastic Countersunk Head Phillips
- Screw For Plastic Mushroom Head
- SCREW D ECARTEMENT TORX ZINGUE
- HEX SOCKET DISTANCE SCREW
- SCREW FOR GLAZING BEAD
- SCREW FOR PLASTIC HEX SOCKET PAN HEAD CAP BLACK
- Screw For Plastic Pan Head
-
Self Drilling
- Self Drilling Countersunk Head
- SCREW SELF DRILLING COUNTERSUNK HEAD PHILLIPS DIN 7504 P
- SCREW SELF DRILLING COUNTERSUNK HEAD TORX WITH WINGS DIN 7504
- V.A-PERC COUNTERSUNK HEAD PHILLIPS
- SCREW SELF DRILLING COUNTERSUNK HEAD SQUARE STEEL DIN 7504 P
- SCREW SELF DRILLING COUNTERSUNK HEAD SQUARE DIN 7504 P STEEL
- SCREW SELF DRILLING COUNTERSUNK HEAD TORX DIN 7504 P STEEL
- Chipboard Screw Self Drilling Countersunk Head With Serration Torx Stainless Steel A2
- SELF DRILLING STAINLESS STEEL A2 COUNTERSUNK HEAD POZI DIN 7504P
- SELF DRILLING STAINLESS STEEL A2 COUNTERSUNK HEAD SQUARE DIN 7504 O
- SELF DRILLING STAINLESS STEEL A2 COUNTERSUNK HEAD TORX DIN7504 P
- SELF DRILLING BIMETAL COUNTERSUNK HEAD TORX DRILL LONG
- SELF DRILLING BIMETAL COUNTERSUNK HEAD WITH SERRATION TORX DIN 7504P
- Self Drilling Cylindrical Head
- SCREW SELF DRILLING PAN HEAD PHILLIPS STEEL DIN 7504 N
- SCREW SELF DRILLING PAN HEAD SQUARE STEEL DIN 7504 N
- SELF DRILLING SCREW CYLINDRICAL HEAD PAN HEAD
- V.AUTOPERCEUSE PAN HEAD PHILLIPS EXTRA LARGE
- Screw SELF DRILLING CYLINDRICAL BUTTON HEAD SQUARE PHILLIPS DIN 7504 N STEEL
- SCREW SELF DRILLING CYLINDRICAL BUTTON HEAD TORX DIN 7504 STEEL
- SELF DRILLING PAN HEAD POZI STAINLESS STEEL AISI 410
- SELF DRILLING STAINLESS STEEL A2 CYLINDRICAL BUTTON HEAD POZI DIN 7504 N
- SELF DRILLING PAN HEAD SQUARE STAINLESS STEEL A2 DIN 7504 N
- SELF DRILLING PAN HEAD CAR/ PHILLIPS SQ2+PH2 STAINLESS STEEL A2 DIN 7504 N
- SELF DRILLING STAINLESS STEEL A2 PAN HEAD SQUARE DIN 7504 N
- SELF DRILLING PAN HEAD POZI FIL AGLO STAINLESS STEEL A2
- SELF DRILLING CYLINDRICAL BUTTON HEAD TORX STAINLESS STEEL A2
- SELF DRILLING PAN HEAD TORX STAINLESS STEEL A4
- SELF DRILLING PAN HEAD CAR STAINLESS STEEL AISI 410 DIN 7504
- Self Drilling Hex Head
- SCREW SELF DRILLING HEXAGONAL HEAD WASHER THREAD WOOD
- WOOD SCREWS SELF DRILLING HEXAGONAL HEAD TORX STEEL
- SCREW SELF DRILLING HEXAGONAL HEAD NAIL THREAD ROLLING SCREW STEEL DIN 7504 K
- SCREW SELF DRILLING FASTOVIS HEXAGONAL HEAD STEEL MARK ETANCO
- SCREW SELF DRILLING HEXAGONAL HEAD FLANGE SMOOTH DIN 7504
- Self Drilling with jumper roof
- SELF DRILLING STAINLESS STEEL A2 HEXAGONAL HEAD 7504 K
- SELF DRILLING BIMETAL HEXAGONAL HEAD FLANGE DRILL COURT
- SELF DRILLING BIMETAL HEXAGONAL HEAD FLANGE BIMETAL STEEL / STAINLESS STEEL A2
- SELF DRILLING BIMETAL HEXAGONAL HEAD FULL THREAD NEOPRENE BONDED SEALING WASHER EPDM
- SELF DRILLING HEXAGONAL HEAD STAINLESS STEEL A4
- SELF DRILLING HEXAGONAL HEAD STAINLESS STEEL AISI 410 DIN 7504
- SELF DRILLING BIMETAL STEEL / STAINLESS STEEL A4 HEXAGONAL HEAD NEOPRENE BONDED SEALING WASHER EPDM
- Self Drilling Screw With Neoprene Bonded Sealing Washer Epdm
- Self Drilling Countersunk Head
-
Self Tapping Screw
- Self Tapping Screw Hex Head
- Self Tapping Screw Cylindrical Head
- SCREW AUTO-TAURADEUSE PAN HEAD SLOTTED SERRATION
- Screw SELF TAPPING LARGE PAN HEAD POZI 3 LOBED STEEL DIN 7500 C
- Screw SELF TAPPING LARGE PAN HEAD TORX 3 LOBED STEEL DIN 7500 C
- Screw SELF TAPPING LARGE PAN HEAD PHILLIPS 3 LOBED STEEL DIN 7516A
- MICRO SCREW SELF TAPPING PAN HEAD PHILLIPS STEEL
- MICRO SCREW SELF TAPPING SCREW LINCH PIN METAL PAN HEAD PHILLIPS ZIN
- Screw SELF TAPPING PAN HEAD TORX STEEL DIN 7500E
- SELF TAPPING SCREW CYLINDRICAL BUTTON HEAD TORX STAINLESS STEEL A2 DIN 7500
- SELF TAPPING SCREW CYLINDRICAL BUTTON HEAD POZI STAINLESS STEEL A2 DIN 7500 C
- SELF TAPPING SCREW STAINLESS STEEL A2 CYLINDRICAL BUTTON HEAD TORX DIN 7500
- SELF TAPPING SCREW COUNTERSUNK HEAD TORX STAINLESS STEEL A2
- Self Tapping Screw Countersunk Head
- MICRO SCREW SELF TAPPING SCREW THREAD METAL COUNTERSUNK HEAD PHILLIPS ZING
- Screw SELF TAPPING COUNTERSUNK HEAD POZI 3 LOBED DIN 7500 M STEEL
- SCREW SELF TAPPING COUNTERSUNK HEAD TORX 3 LOBED DIN 7500 P
- MICRO SCREW SELF TAPPING COUNTERSUNK HEAD PHILLIPS STEEL
- SELF TAPPING SCREW STAINLESS STEEL A2 COUNTERSUNK HEAD POZI DIN 7500 M
-
Security Screw
- SCREW SECURITY SHEAR HEXAGON RECESS STAINLESS STEEL A2
- NUT SECURITY SHEAR STAINLESS STEEL A2
- Bit Linch Pin Screw Safety
- Safety With Dog Point
- SCREW TRUSS STAINLESS STEEL A2 TORX+TETON
- Screw Truss Security Torx + Dog Point Stainless Steel A2
- MACHINE SCREW STAINLESS STEEL A2 SECURITY PAN HEAD TORX+TETON
- MACHINE SCREW SECURITY BHC+TETON STAINLESS STEEL A2
- MACHINE SCREW STAINLESS STEEL A2 SECURITY COUNTERSUNK HEAD TORX+ DOG POINT DIN965
- MACHINE SCREW STAINLESS STEEL A2 SECURITY FLAT HEAD HEXAGON RECESS HEXAGON RECESS DOG POINT
- MACHINE SCREW SECURITY PAN HEAD TORX + DOG POINT STAINLESS STEEL A2
- THREAD ROLLING SCREW SECURITY STAINLESS STEEL A2 COUNTERSUNK HEAD TORX + DOG POINT DIN 7982
- THREAD ROLLING SCREW SECURITY STAINLESS STEEL A2 PAN HEAD TORX + DOG POINT
- SNAKE EYES
- Screw ONE WAY
- Screw Truss Security Torx Steel
- Screw Truss Security Torx Stainless Steel A2
screws
-
-
Nuts
-
Nut Hexagonal
- Hexagonal nut Thin
- Hexagonal nut High Hh
- Nut Specific Step
- Nut Flanche Without Serration
- Hexagonal nut Fine Thread
- Hexagonal nuts Across Flat
- Hexagonal nuts Aluminium DIN 934,VS4315
- Hexagonal nut Class 10 ISO 4032 NFE 24032 ISO 4032,VS-ISO4032
- Hexagonal nuts Class 8 ISO 4032 NFE 24032 ISO 4032,VS-ISO4032,VS4325
- Hexagonal nut Class 10 DIN 934 DIN 934
- Hexagonal nut Class 8 DIN 934 DIN 934,VS4325
- Nut Brass Hexagon DIN 934 DIN 934
- Hexagonal nut Stainless Steel A2 + Wax Lubricated DIN 934 DIN 934, VS0100
- Nut Hexagon Stainless Steel A4 DIN 934 DIN 934, VS0100
- Hexagonal nuts to SLOTS DOWN Stainless Steel A2
-
Nut Lock
- Lock Nut Witn Nylon Ring
- Nut Lock Entirely METAL
- NUT LOCK ENTIRELY METAL BILOCK DIN 980V
- NUT LOCK ENTIRELY METAL TRILOCK
- NUT LOCK DOUBLE FENTE DAH
- CASTLE NUT HK DIN 935
- HEXAGON SLOTTED AND CASTLE NUT FINE THREAD DIN 935
- NUT PAL NFE 27460
- NUT LOCK SLOTTED H100 class 8
- NUT LOCK SLOTTED H130 class 8
- NUT LOCK FINE THREAD DIN 980V
- NUT LOCK ENTIRELY METAL STAINLESS STEEL A2 DIN980V
- PAL SELF LOCKING COUNTER NUTS STAINLESS STEEL A2
- NUT HEXAGONAL for CRENEAUX STAINLESS STEEL A1
- NUT HEXAGONAL for CRENEAUX STAINLESS STEEL A4
- NUT HEXAGONAL for CRENEAUX STAINLESS STEEL A2
- NUT LOCK ENTIRELY METAL STAINLESS STEEL A4 DIN 980V
- Nut Flange
- NUT LOCK ENTIRELY METAL for COLLAR BILOK DIN 692
- NUT FLANGE WITH SERRATION DIN 6923
- NUT PAL FINE THREAD NFE 27640
- NUT TWOLOK CS
- NUT TWOLOK CL
- NUT LOCK FLANCHE WITHOUT SERRATION DIN 6926
- NUT HEXAGON FLANGE WITH SERRATION class 8 DIN 923
- NUT HEXAGON STAINLESS STEEL A2 FLANCHE WITHOUT SERRATION
- NUT HEXAGON STAINLESS STEEL A2 FLANGE WITH SERRATION DIN 6923
- NUT HEXAGON CAPTIVE STAINLESS STEEL A2
- NUT HEXAGON FLANGE WITH SERRATION STAINLESS STEEL A4
-
Weld Nut
- NUT HEXAGONAL WELDING DIN 929
- NUT CYLINDRICAL WELDING
- NUT WELDING SQUARE DIN 928
- NUT WELDING INCURVE
- NUT WELDING SQUARE COLLAR DIN 928C
- NUT CYLINDRICAL WELDING 2BOSSAGES EXTERNAL STAINLESS STEEL
- NUT HEXAGONAL WELDING STAINLESS STEEL A2 DIN 929
- NUT CYLINDRICAL WELDING HIGH STAINLESS STEEL A2
- NUT WELDING SQUARE STAINLESS STEEL A2
- NUT WELDING SQUARE STAINLESS STEEL A4 DIN 928
nuts
-
-
Washers
-
Flat Washer
- Washer Flat Narrow Type
- Washer Flat Normal Serie
- Washer Flat Large Serie
- Washer Flat Extra Large Serie
- Washer Flat Special
- Washer Special Brass
- Washer Special Stainless Steel A2
- Washer Special Steel
- FLAT WASHER SPECIAL STEEL
- FLAT WASHER SPECIAL STEEL DIAMETER 4
- FLAT WASHER SPECIAL STEEL DIAMETER 5
- FLAT WASHER SPECIAL STEEL DIAMETER 6
- FLAT WASHER SPECIAL STEEL DIAMETER 7
- FLAT WASHER SPECIAL STEEL DIAMETER 8
- FLAT WASHER SPECIAL STEEL DIAMETER 9
- FLAT WASHER SPECIAL STEEL DIAMETRE10
- FLAT WASHER SPECIAL STEEL DIAMETRE12
- FLAT WASHER SPECIAL STEEL DIAMETRE13
- FLAT WASHER SPECIAL STEEL DIAMETRE14
- FLAT WASHER SPECIAL STEEL DIAMETRE15
- FLAT WASHER SPECIAL STEEL DIAMETRE16
- FLAT WASHER SPECIAL STEEL DIAMETRE18
- FLAT WASHER SPECIAL STEEL DIAMETRE20
- FLAT WASHER DECOLLETE NORMAL SERIE
- Washer Flat DIN125
- Washer Flat TOL Ordinary
- REPAIR PENNY WASHER ZU STEEL NFE 25514
- REPAIR PENNY WASHER LU STEEL NFE 25514
- FLAT WASHER LARGE STEEL DIN 7349
- SHIM RINGS STAINLESS STEEL A2 DIN 988
- WASHER CONSTRUCT METALLIC STAINLESS STEEL A2 DIN 7989
- WASHER CONVEXE FORME C STAINLESS STEEL A2 DIN 6319 C
- WASHER CONCAVE FORME D STAINLESS STEEL A2 DIN 6319D
- WASHER CONSTRUCT METALLIC STAINLESS STEEL A4 DIN 7989
-
Security And Spring Washer
- Contact Lock Washer
- LOCK D ECR BRACKETS STAINLESS STEEL A2
- Serrated Lock Washer
- Washer Split Lock
- Washer STOP AXIAL Retaining
- Onduflex Spring Washer
- Washer NORD-LOCK ®
- Cup Washer:
- WASHERS SCHNORR TYPE VS
- WASHER BELLEVILLE STEEL DIN 2093
- ROUND CONICAL STEEL NFE 25510
- SPRING WASHER ONDULEE SLOTTED STAINLESS STEEL
- LONG TAP WASHER
- WASHER CONICAL RESSORT STAINLESS STEEL DIN 2093
- WASHER ELAST IN CUVETTE STAINLESS STEEL A2
-
Retaining Rings And Retaining Rings
- WASHER GRIFAXE WITH WINGS
- VISTOP LOCK WASHER
- RING TRUARC CROISSANT TYPE 853
- RETAINING WASHER FOR SHAFT HEAVY DUTY TYPE 864
- RING SELF LOCKING TYPE 876
- RETAINING RINGS INTERNAL RETAINING DIN 472
- RETAINING RINGS INTERNAL RETAINING STAINLESS STEEL A2
- Retaining Rings External DIN 471
- Truarc E-Type Retaining Ring
- Self-Locking External Ring PLUS TYPE873
- Covered Ring Aran Lock
- RING Of STOP Linch Pin Retaining Stainless Steel A1 DIN9925
washers
-
-
Threaded rods
Threaded Rod
-
Boxes/Tools
Sets
- Set of fixation
- DEGOMETAL GO rivet gun
- Metal drywall anchor setting tool
- Measuring Tools
- Spirit level
- Drill bit for hard stone and granite
- HSS tap
- Multi-material drill bit
- Ceramic drill bit
- Drill bit for non-tempered glass
- Combination spanner
- SCREWDRIVER PHILLIPS
- SCREWDRIVER TORX
- SCREWDRIVER SLOTTED
- SCREWDRIVER POZI
Boxes / Tools
-
Fasteners
-
Bracket Anchor Plate Joist Hanger Hinge
- CHARNI D
- Hinge Double Oval 8 Hole Stainless Steel A2
- Hinge Type E 6 Hole Stainless Steel A2
- Hinge TYPE SLOTTED 6 HOLE STAINLESS STEEL A2
- Hinge TYPE G 4 HOLE STAINLESS STEEL A2
- Hinge TYPE H 4 HOLE STAINLESS STEEL A2
- Hinge TYPE I 6 HOLE STAINLESS STEEL A2
- Hinge PIANO LENGTH 1 METER STAINLESS STEEL A2
- Hinge TYPE B 6 HOLE STAINLESS STEEL A2
- Hinge TYPE C 5 HOLE STAINLESS STEEL A2
- Hinge TYPE D 6 HOLE STAINLESS STEEL A2
- Hinge HEAD 7 HOLE STAINLESS STEEL A4
- Hinge lift-off hinge Right Stainless Steel A4
- Hinge RECTANGULAR STAINLESS STEEL
- Hinge Square black nylon
- Hinge symmetrical black nylon
- Garden Fittings
- Window fixing bracket
- Bracket Lug Of fixation
- Brackets Aluminium
- Mounting bracket
- Bracket Metallic 90 Zinc Plated
- Bracket 2 And 3 Hole
- Adjustable bracket with 2 holes
- Fixing brackets
- Fixing brackets
- Flat angle bracket or fixing bracket
- Fixing brackets vs7110
- Brackets Flat Of REINFORCEMENT to Point Square
- Brackets Flat Of REINFORCEMENT to Point ROUND
- Brackets Shelf Steel White
- Brackets 4 Hole Stainless Steel A2
- Bracket Spoon Shelf Support
- Bracket BLACK With REINFORCEMENT
- Joist Hanger Of Carpenter
- Joist hanger U-shaped beam support
- Lug Bracket Anchor
- Bent truss shoe
- Joist Hanger form U to Wings External
- Joist hanger U-shaped to Wings Internal
- Sets 2 joist hanger Left Right
- Long-flange joist hanger
- Joist Hanger BEAM Without LIP
- Joist hanger with foldable flange
- Timber beam connector
- Lug Of JOISTS Type to
- Lug Of JOISTS Left vs9696
- Anchor Plate EXPRESS Black Zinc Plated
- Flangeless joist hanger vs9694
- PLATINUM Connector Wood
- PLATINUM Of CONNECTION NARROW Stainless Steel A2
- Anchor COUPLING
- Anchor IPN Wood Sendzimir
- PLATINUM Gate COAT
- PLATINUM Of CONNECTION NARROW Zinc Plated
- Anchor Plate Zinc Plated Sendzimir
- PLATINUM to Nail Zinc Plated Sendzimir
- PLATE to NAIL
- PLATINUM D ASSEMBLY
- PLATINUM ASSEMBLY Thickness 2.5
- PLATINUM Of fixation With Nut Hexagon
- CRAMPON Wood Double TEETH Zinc Plated
- Paneling clips no In Steel ZINGUE
- CHARNI D
-
Ironware
- Eye Screws Machine And Eye Screw Wood
- Eye Screws Wood Brass NFE 25609 NFE 25609,VS0120
- Eye Screws Wood
- EYE SCREW MACHINE DIAMETER EYE
- EYE SCREWS MACHINE WITH COLLAR
- OEILLET ECHAFAUDAGE
- EYE SCREW WOOD 4X30 EYE STAINLESS STEEL A2
- EYE SCREW WOOD EYE STAINLESS STEEL A2 NFEC 25609
- Gym hook Thread Wood Stainless Steel A2
- Piton Machine Eye Stainless Steel A2
- EYE SCREW RING FILETAGE WOOD STAINLESS STEEL A4
- Gym hook Thread Machine Stainless Steel A2
- Hooks Wood / Hooks Machine
- Hooks Machine / Hooks Wood
- Hook SWING +3 Nut
- HOOK GYMNASE THREAD WOOD ZINC PLATED
- EYE SCREW FORGE FIXATION ECHAFFAUDAGE
- Eye Screws Machine And Eye Screw Wood
-
Anchors
- fixation Linch Pin Heavy Loads
- Bolt With Nut Anchor With Machine Screw Hexagonal Head
- PLUG CRAMPON
- WALL FIXING RAWL BOLT
- PLUG ANCHOR WITH EYE SCREW
- METAL BOLT WITH NUT RKT
- STUD ANCHOR PLUG METAL
- PLUG METAL FM-MP3
- BOLT WITH NUT ANCHOR WITH MACHINE SCREW HEXAGONAL HEAD STAINLESS STEEL A4
- Anchor Linch Pin Concrete
- Fixation Linch Pin Concrete
- Plug NUGGET RAWL
- SCREW FOR CONCRETE HEXAGONAL HEAD HEX HEAD FLANGE
- SCREW FOR CONCRETE HEX HEAD FLANGE
- Screw Concrete Countersunk Head Reduced Torx
- Screw Concrete Pan Head Reduced Torx
- Screw For Concrete Hexagonal Head Stainless Steel A4
- Screw For Concrete Head Pan Head Torx Stainless Steel A4
- Screw For Concrete Countersunk Head Torx Stainless Steel A4
- Screw For Concrete Bimetal Stainless Steel A4 Steel Hexagonal Head
- Screw For Concrete Female
- Screw For Concrete Head THREADED MALE
- Screw For Concrete Countersunk Head Torx Zinc Plated
- Screw For Concrete Hexagonal Head Blue Ruspert
- Screw For Concrete Hexagonal Head Neoprene Bonded Sealing Washer Epdm Blue Ruspert
- Screw For Concrete Head Pan Head Torx Zinc Plated
- Plug Drive-In Plug
- Insulation Fasteners
- Chemical Sealing
- PLUG CHIMIQUE CAPSULE
- TAMIS D INJECTION PLASTIQUE RAWL
- TAMIS D INJECTION
- TAMIS METALLIC
- Metal sleeve for chemical anchor
- THREADED ROD ANCHOR CHIMIQUE
- SOUFLETTE OF NETTOYAGE ANCHOR CHIMIQUE
- BROSSE OF NETTOYAGE
- BROSSE METALLIC
- CANULE MELANGEUSE ANCHOR CHIMIQUE
- CARTOUCHE RESINE POLYESTER
- Threaded Rod Anchor CHEMICAL Stainless Steel A4
- Dowel for plasterboard
- PLUG NYLON WITH WOOD SCREWS COUNTERSUNK HEAD
- PLUG NYLON RESSORT LINCH PIN CORPS CREUX
- PLUG NYLON LINCH PIN PLAQUE OF PLATRE
- PLUG METAL for HOOK
- Befestigungslosungen aus Metall ZUM HAKEN
- PLUG METAL for CLOUER WITHOUT SCREW
- PLUG METALSPID + SCREW
- PLUG NYLON SELF DRILLING LG/VIS
- Metal Plugs PLATE PLASTER With Screw
- PLUG METALLIC
- Plug PLATE PLASTER With Screw Hexagonal Head
- Ceiling anchor
- Plug Plastic
- PLUG BRASS
- Plug ANC + Hook Zinc Plated CHARGE AVERAGE
- fixation Linch Pin Heavy Loads
-
Rivet
- Rivet Blind
- Rivet Blind STRUCTURAL high strength
- Rivet Blind Sealed ( Rivet Blind WATERPROOF)
- Rivet Sealed TRS Aluminium ( rod Steel )
- Rivet Sealed TRS Stainless Steel
- Rivet Sealed Aluminium ( rod Steel )
- Rivet Sealed Large Head Aluminium ( rod Steel )
- Rivet Sealed TRS Aluminium
- Rivet Sealed TRS Aluminium ( rod Stainless Steel )
- Blind Rivet HIGHBOT Countersunk Head Steel
- Rivet Sealed Countersunk Head Aluminium ( rod Steel )
- Rivet Blind STANDARD ( Rivet BLIND)
- Rivet Blind MULTI-CONNECTING GRDE range Tightening
- Multigrip blind rivets TRS Aluminium rod Steel
- Multigrip blind rivets Extra Large Head Aluminium rod Steel DOC 3720
- Multigrip blind rivets Flat Head Stainless Steel
- Multigrip blind rivets Countersunk Head 120 Aluminium rod Zinc Plated
- MULTIGRIP RIVET BLIND ALUMINIUM TIGE STEEL HEAD LARGE
- Rivet Multigrip Flat Head Aluminium rod Stainless Steel DOC 3720
- Rivet Multigrip Flat Head Aluminium rod Steel DOC 3720
- Rivet Steel/ steel Large Head Multigrip
- Rivet Blind Peeled Linch Pin MATERIALS TENDER
- Rivet STAR GOLIGHT ALU/ALU TRS
- Rivet Expanded to HIT
- Rivet FULL Drive-In Plug
- Solid Rivet Countersunk Head NFE 27154F
- Solid Rivet Round Head NFE 27153R
- Solid Rivet Cheese Head NFE 27152G01
- Solid Rivet Flat Head NFE 27151C
- RIVET SIM TYPE U HEAD DEMIE RONDE STEEL
- HAMMER DRIVE SCREWS TYPE U ROUND HEAD BRASS PLATED STEEL
- HAMMER DRIVE SCREWS TYPE U ROUND HEAD STAINLESS STEEL A2
- Solid Rivet Countersunk Head Stainless Steel A2 DIN661,VS8647
- Solid Rivet Round Head Stainless Steel A2 DIN660
- Grooved Pins With Round Head Stainless Steel A2 DIN 1476 DIN1476
- Solid Rivet Stainless Steel Round Head NFE 27153 R NFE 27 153 R
- Solid Rivet Stainless Steel Countersunk Head ISO 15984
- Rivet FORE
- Rivet Blind
-
Nylon Range
- Washer Nylon
- FLAT WASHER SPECIAL NYLON DIAMETRE8
- WASHER NYLON DIAMETER 4
- FLAT WASHER NYLON DIAMETER 5
- FLAT WASHER NYLON DIAMETER 6
- FLAT WASHER NYLON DIAMETER 8
- Cup Washer: Nylon
- WASHER NYLON
- Cup Washer: V.TF M8 Nylon
- WASHER SQUARE NYLON DIN 436
- FLAT WASHER NYLON DIN 433
- FLAT WASHER NORMAL SERIE NYLON
- FLAT WASHER LARGE SERIE NYLON
- Screw Nylon
- MACHINE SCREW PAN HEAD SLOTTED NYLON DIN 84 NFE 25127
- MACHINE SCREW LARGE PAN HEAD NYLON SLOTTED DIN 85 NFE 25128
- MACHINE SCREW LARGE PAN HEAD PHILLIPS NYLON
- Screw Mushroom Slotted Or Cross Nylon Polyamide 6.6
- Machine Screw Nylon Polyamide 6.6 Countersunk Head Slotted DIN 963 DIN 963
- Machine Screw Nylon Pan Countersunk Head Slotted Polyamide 6.6 DIN 964 NFE25-124, DIN964
- Screw Set Screw Slotted Nylon Flat Point DIN551
- Screw Wing Nylon DIN 316 DIN 316
- Shoulderless Thumb Screw Nylon
- Machine Screw Nylon Pan Head Knurlled SHOULDER
- Machine Screw Hexagonal Head Nylon Natural Polyamide 6.6 DIN 933 NFE24-017, DIN933
- FOOT Screw Jack ADJUSTABLE Square Neck Carriage
- FOOT Screw Jack ADJUSTABLE
- Machine Screw Socket Head Hexagon Socket 2.5 Nylon Polyamide 6.6 ISO 4762 DIN 912 ISO 4762
- Machine Screw Carriage Bolt natural nylon DIN603
- Binding Screw Diameter Tube Nylon 2 pieces Male/Female
- SLEEVE NUT NYLON 6.6 NATURAL
- COUPLING NUT CYLINDRICAL SMOOTH NYLON DIAMETER
- CALE OF POSE FORK
- Nut Nylon
- Threaded Rod Nylon
- Washer Nylon
-
Accessory And Cover Cap Brass
- CAP ROND. BRASS DIAMETER 15 TIGE
- LUG CHROME PLATED BRASS +EMBASE ZINC ALLOW LINCH PIN MIRROR
- CONNECTOR CHROME PLATED BRASS LINCH PIN CHAIN
- COVER CAP CONICAL BRASS COVER CAP M3 STEP 60
- COVER CAP WITH GAP
- COVER CAP CONICAL BRASS INNER THREAD M3 PITCH (BLIND HOLE) 50
- COVER CAP CONICAL BRASS INNER THREAD M3 PITCH (BLIND HOLE) 60
- COVER CAP CONICAL BRASS INNER THREAD M4 (BLIND HOLE)
- COVER CAP CONICAL BRASS TB4/ 75
- COVER CAP CONICAL BRASS INNER THREAD M5 (BLIND HOLE)
- COVER CAP CONICAL BRASS INNER THREAD M10 (BLIND HOLE)
- BRASS
- CYLINDRICAL COVER CAP MESSING ( 2 PIECES )
- ROS ROND 2PIECE
- COVER CAP SQUARE BORD ROUND BRASS POLI
-
Caps Covers and Door Stops
- Cover Cap
- COVER CAP PLASTIC
- Plastic cap Screw Diameter
- Cap Plastique
- Cap Plastique Pozi PZ1
- Cap Screw Countersunk Socket Cap Hexagon Recess
- Cover Cap Cylindrical Button Head Thread Rolling Screw
- Cover Cap Countersunk Head Torx
- Cap Plastique Phillips 2
- Cover Cap Coach Screw vs3816
- Cover Cap Hexagonal Head Nylon
- Cover Cap Rivet Plastique
- Cap
- CLIPS PRESSURE NYLON
- Cap Linch Pin Hook Machine
- Door Stop
- Cover Cap Adhesive
- Cover Cap
-
Self Locking Cable Tie And Trigger guard Drive-In Plug
- Self Locking Cable Tie Nylon Polyamide 6.6 White
- SUPPORT ADHESIVE Linch Pin LINK
- SUPPORT WALL Nylon Black LINK
- SUPPORT WALL form Plug Nylon Black
- Self Locking Cable Tie Nylon Polyamide 6.6 Black
- Re-openable clamps white nylon Polyamide 6.6
- Re-openable clamps black nylon Polyamide 6.6
- PINCE SELF LOCKING CABLE TIE NYLON
- PONTET DRIVE-IN PLUG WITH NAILS TREMPE
- VELCRO Double FACE
- Pontet Linch Pin fixation Wire Rope ELECTRIC
- Hose clamp color Nylon
-
Hose clamp W1 Stainless Steel W2 W4
- Double clamping trunnion clamp W1 / Zinc Plated
- T-BOLT FOR THICK AND REINFORCED PIPE PLAIN W1ZINC PLATED
- Hose clamp W4 Diameter Stainless Steel DIN3017
- Hose clamp W5 Diameter WIDTH BAND DIN3017
- T-Bolt For Thick And Reinforced Pipe Stainless Steel W5
- Hose clamp non-perforated band Plain W1Zinc Plated
- Hose clamp offset head non-perforated band of Plain W1Zinc Plated
- Hose clamp offset head non-perforated band of Stainless Steel W4
- Hose clamp perforated band W2/ZG
- Hose clamp perforated band Stainless Steel W4
- T-Bolt For Thick And Reinforced Pipe Stainless Steel W4
- MINICLAMP Plain W1Zinc Plated
- MINICLAMP Stainless Steel W4
- Hose clamp double wire Plain W1Zinc Plated
- Hose clamp double wire Stainless Steel W4
-
Various
- FLANGE LINCH PIN FIXATION MIRROR ZAM
- COLLIER ATLAS SIMPLE
- Units DECOLL. PAR B
- Units DECOLL. PAR C
- Units DECOLL. PAR D
- Units DECOLL. PAR E
- Units DECOLL. PAR I
- Units DECOLL. PAR K
- Units DECOLL. PAR O
- Units DECOLL. PAR HEAD
- SCREW Wire rope clip
- WASHERS BRASS
- CAP // TIGES GALVA
- VARIOUS S
- Dowels Wood And CROSSE ANCHORING
-
-
Fittings
Marine fittings
- U BOLT IN U WITH DOUBLE PLAQUES
- Wire rope clip CROISE STAINLESS STEEL A4
- WIRE ROPE CLIP WITH U-BOLT ROUND BOTTOM ZING
- Wire rope clip PLAT SIMPLEX ZING
- Duplex flat wire rope clip
- WIRE THIMBLE LEGERE ZING
- SNACKLE RIGHT for EYE SCREW for EYE ZING
- Wire rope clip U-BOLT STAINLESS STEEL A4
- QUICK LINK FOR CHAINS STAINLESS STEEL A4
- S-HOOK STAINLESS STEEL A4
- WIRE THIMBLE STAINLESS STEEL A4
- DOUBLE FLAT WIRE ROPE CLIP STAINLESS STEEL STAINLESS STEEL A4
- SIMPLE FLAT WIRE ROPE CLIP STAINLESS STEEL STAINLESS STEEL A4-
- WELDED RING STAINLESS STEEL A4
- SPRING HOOK STAINLESS STEEL A4
Chandlery
-
Spax range
- Technical sheets
- My purchases
Thread Zinc Plated M6X76
Diameter = M6, Length = 76, Coating = Zinc Plated, Material = Steel, Norm = DIN 976
dimensional guide (mm)
Other Reference : 3617500652034 3663072427167
Diameter = M6, Length = 76, Coating = Zinc Plated, Material = Steel, Norm = DIN 976
dimensional guide (mm)
| Diameter | M2 | M2.5 | M3 | M3.5 | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18 | M20 | M22 | M24 | M27 | M30 | M33 | M36 | M39 | M42 | M45 | M48 | M52 | M56 | M60 | M64 | M68 | M72 | ||
| Pitch | - | - | - | - | - | - | - | 100 | 125 | 125 | 150 | 150 | 150 | 150 | 150 | 200 | 200 | 200 | 200 | 200 | 300 | 300 | 300 | 300 | 300 | 300 | 400 | 400 | 400 | 400 | 600 | |
| The designation indicates diameter X length. |
Other Reference : 3617500652034 3663072427167
Tap to zoom
